throttle cable used in a 350 swap

[tpattyII]

i did a 350 swap a while back and used a random throttle cable laying around the shop. i recently put the holley projection system on and now have problems with the throttle cable that once worked. i need a cable that pulls and mine pushes. i routed the old cable so that this one would work...but it binds and causes the throttle to stick. for all i know a stock 60 cable may work...anyone know what cable would be best for my setup? thanks in advance.

 

[TOY350]

We have used stock GM ones from suburbans or pickups which can be bought at any parts store. They work fine, but I wanted to try the one Downey Off Road offered, made specifically for the 60 DOWNEY, it's under the carb section.

 

[Dynosoar]

1977 Cadilac ElDorado throtle cable was perfect for my Chevy TPI engine.

Dynosoar

 

[Tinker]

I used Lokar's pedal & cable to the stock bracket on a 5.7 Vortec. Plenty of adjustment, but it might be too close to the firewall if you're keeping the manual trans.

I wanted legroom & got it.