The Ultimate 80 Series Parts Discontinued Thread (8 Viewers)

[Dirty Koala]

Bump:

Center shifter console is gone (the plastic structure that goes around the tranny/xfer shifters). Both in tan and gray.

1/1990-1/1995:
58811-60010-03
58811-60010-06

1/1995-EOP:
58811-60090-E0
58811-60090-B0

Are you able to tell if the tan manual console for the 95-97 from the euro pipeline is still available?

 

[Corbet]

with the low sales numbers of the 200 I imagine when this conversation will be really depressing when the 200 gets old.

 

[OGBeno]

Are you able to tell if the tan manual console for the 95-97 from the euro pipeline is still available?

Morgan: I would check with Akella on MUD who has non-US connections for parts.

Also, places like www.amayama.com or David Stedman at Japan4x4.

I cannot see or touch those parts unfortunately.

 

[cruiserdan]

with the low sales numbers of the 200 I imagine when this conversation will be really depressing when the 200 gets old.

Agreed.

All 10 of them will be out of luck...

 

[OGBeno]

Hey c'mon, let's at least raise those parts trucks to 1000....

 

[cruiserdan]

Hey c'mon, let's at least raise those parts trucks to 1000....

I guess I was thinking only of New Mexico.....

 

[OGBeno]

I guess I was thinking only of New Mexico.....

Then I think you would be spot on sir.

 

[cruiserdan]

By the way I absolutely LOVE the 5.7 V8 and the interior. Unfortunately the wrapper ruins it for me.

 

[DSRTRDR]

Agreed.

All 10 of them will be out of luck...

so I'll have to keep the 40 for when I am really old ?

 

[cruiserdan]

I would. As long as you can climb in it and operate the controls. That's my plan.......

 

[TrickyT]

OK, I'll chime in. The PS low pressure return hose (the one with the pre-formed right angle) is unobtainable unless you buy the complete $500 oil cooler assembly.

 

[1973Guppie]

sub'd, are the rear slider window rubber stripping still available?

 

[OGBeno]

sub'd, are the rear slider window rubber stripping still available?

Yes, they are still available.

 

[OGBeno]

OK, I'll chime in. The PS low pressure return hose (the one with the pre-formed right angle) is unobtainable unless you buy the complete $500 oil cooler assembly.

Technically not a discontinuation in its classic meaning.

That part just cannot be bought separately from the whole assy. I'd call that "aw s***, really?"

 

[TrickyT]

OK then, how about the smog pump for the FJ80 (17610-61050). Surely that is discontinued.

 

[cruiserdan]

Shirley you are correct.

 

[OGBeno]

OK then, how about the smog pump for the FJ80 (17610-61050). Surely that is discontinued.

Hey Tom--can I "like" your sig line about the FJC?

Smog pump? Shirley is correct.

 

[Sam Stewart]

Pretty much all the 3FE stuff seems to be going the way of the dodo.

 

[TrickyT]

Hey Tom--can I "like" your sig line about the FJC?

Smog pump? Shirley is correct.

Only if you like Shirley too.

 

[cruiserdan]

Don't call me Shirley.