The Knitting Circle (7 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Saw that earlier, unbefreakinlievable.
 
You know you're a douche when...

Likely sent from the bathroom stall using IH8MUD

image-3464765564.webp
 
Oh, hey buddy... (FYI - wide open group of spots)

Likely sent from the bathroom stall using IH8MUD

image-3083004380.webp
 
Who's got a 92 FSM? I need instructions on pulling the thirds. If I'm going through the trouble of pulling the thirds, and I gotta already undo the drums and pull the shafts, is it worth doing new seals and everything while I'm in there?
 
I got it on a disk. When do you need it by?
 
Sadly no it's a 3.5 :crybaby:
 
matt32 said:
I got it on a disk. When do you need it by?
Click to expand...

I'm not going to get to it this weekend, so next week sometime is fine. Did you download it somewhere that has a link online? Obvious question, I know.
 
xodeuce said:
Who's got a 92 FSM? I need instructions on pulling the thirds. If I'm going through the trouble of pulling the thirds, and I gotta already undo the drums and pull the shafts, is it worth doing new seals and everything while I'm in there?
Click to expand...

I've got a pdf version too - pm me your email address.

Why are you pulling the thirds? on the front, no need for knuckle seals - just did them not too long ago. New bearings, longfield wipers, marlin seals, etc when I installed the front aussie.

On the rear, yes, but there isn't much back there on the SF. big bearings that slosh around in gear oil and never go out IIRC and a seal.
 
Got it from Matt B.

Do you know how large a file you can receive via e-mail? It's only about a 40MB file.
 
bhmmapping said:
I've got a pdf version too - pm me your email address.

Why are you pulling the thirds? on the front, no need for knuckle seals - just did them not too long ago. New bearings, longfield wipers, marlin seals, etc when I installed the front aussie.

On the rear, yes, but there isn't much back there on the SF. big bearings that slosh around in gear oil and never go out IIRC and a seal.
Click to expand...

They're both leaking pretty good, and Nick gave me 2 tubes of Toyota FIPG with the truck. Figure I might as well. Perhaps I'm being optimistic though.

Gonna start troubleshooting the AC this weekend and see where I can get with it.

I need to buy you a beer and just chat about the truck. There are a bunch of questions I keep thinking of. Any idea when the last oil change was? (assuming Nick didn't do one in the 800 miles he owned it) HG, or is it not an issue on the 3FE?
 
Ready? OK! It's a major PITA to get to the point that the thirds can come out... especially just for leaks... So.... I've been known to be able to fix leaks by merely loosening the difs and squirting FIPG into the tiny crack....
It means draining the difs and lossening the nurts. But it beats pulling the axle shafts on front and rear...
I can help you.
 
xodeuce said:
HG, or is it not an issue on the 3FE?
Click to expand...

LOL.

Just start drinking that beer, piss in the gas tank... the 3FE will run off urine if need-be.
 
So the wife and I are in Memphis. To get onto Beale they are making everyone show ID and go through a metal detector or pat down. I have my handy rights ID card ready to show them. I'm ready and packing...
 
Land Speeder said:
Ready? OK! It's a major PITA to get to the point that the thirds can come out... especially just for leaks... So.... I've been known to be able to fix leaks by merely loosening the difs and squirting FIPG into the tiny crack....
It means draining the difs and lossening the nurts. But it beats pulling the axle shafts on front and rear...
I can help you.
Click to expand...

2nd the motion.
 
mjl132 said:
So the wife and I are in Memphis. To get onto Beale they are making everyone show ID and go through a metal detector or pat down. I have my handy rights ID card ready to show them. I'm ready and packing...
Click to expand...

its all fun and games till its your rights getting s*** on. :rolleyes:

First they came for the communists,
and I didn't speak out because I wasn't a communist.

Then they came for the socialists,
and I didn't speak out because I wasn't a socialist.

Then they came for the trade unionists,
and I didn't speak out because I wasn't a trade unionist.

Then they came for the Jews,
and I didn't speak out because I wasn't a Jew.

Then they came for the Catholics,
and I didn't speak out because I wasn't a Catholic.

Then they came for me,
and there was no one left to speak for me.
Click to expand...
 
justbecause said:
its all fun and games till its your rights getting s*** on. :rolleyes:
Click to expand...

You're right. I had a crisis of conscious until I realised that I could just not come onto Beale and avoid the 'violation' of my rights. Funny now one can vote with their feet and I chose to trust the police to ensure my safety. Now I'm watching a good Blues band and a white guy higher than a kite on meth make a fool of himself.

And this cost me was a line and a metal detector? Deal!
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 8 (members: 0, guests: 8)

Share this page

Back
Top Bottom