The Knitting Circle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

My boy laid his face in pancakes this morning "because they are warm".
I think I understand Hank Hill a little more every day.


"6am and the boy already ain't right"
 
coveboy said:
Hey y'all, just wanted to introduce myself and looked like this (might be) was the spot to do it! I'm originally from the Florida panhandle, but transferred to go to school up at Auburn (War Eagle!). Anyone else from around the Auburn area? Y'all know of any good trails or camping spots within an hour or two's drive? Also, would love a spot to go shoot sometime or another, and only thing I've heard of is Tuskegee havin a range somewhere, any other suggestions? Thankya!If anyone's ever in need of some help round me just give me a buzz, always have a tow strap, cables, and couple of tool boxes in the cruiser
-Richard
Click to expand...

Welcome! I lived in Auburn for 18 years! just moved to bham this summer...
You've got the GAP to wheel... We used to have a Cruiser group down there but it died out cause all the cruisers left... There's a 4x4 group still organized, they meet on Wednesday's at Buffalo Connection at 7. They park on the backside.... at least I think they meet there, they may have recently moved it.
You've also got Morris Mountain 1.5 hours due north.
DO NOT get off the fireroads in the Nat, Forest down there.... you will be ticketed...
Any event... come up for our Saturday meetings in bham!
 
ClankBang said:
My boy laid his face in pancakes this morning "because they are warm".
I think I understand Hank Hill a little more every day.

"6am and the boy already ain't right"
Click to expand...

Wow is all I can say. Although he could be showing signs of genius by thinking outside of the box.
 
Oh he is smart for sure.
And definitely outside the box.
 
Thank yall for the replies! I'll definitely look into those places to shoot as soon as finals are over this week...

And actually I may be headed to B'ham this weekend to drive my buddy back home (he doesn't have a car here). If I do, I'll definitely come by and say hello! And if anyone's ever near here or lookin to do a ride not too far away, hit me up. I'm always down for some time in the woods.

BamaHeel said:
Aren't you from PC? I lived there a few years and luckily got back to B'ham. Various places to shoot and some good hunting around Lee Co. If you like turkey there are a ton around Jackson's Gap. Welcome aboard!
Click to expand...

I am actually! Transferred from the community college there to up here.
 
finally got the garage cleaned out enough to get started on some projects:

IMAG1049.jpg
 
Are those hundy sliders?
 
ClankBang said:
Are those hundy sliders?
Click to expand...

possibly. Someone(he can out himself if he wants) asked me about some and I had the tubes left over so I thought I would go ahead and build the rails while I was bending. I can use them on my 80 if he doesn't want them or sell them to someone else.

The 80 sliders are for Matt assuming he still wants them.
 
Last edited:
Just sayin, if you have an extra set of hundy sliders laying around, I may know of a Cruiser that could really use a set... ;)
 
bhmmapping said:
possibly. Someone(he can out himself if he wants) asked me about some and I had the tubes left over so I thought I would go ahead and build the rails while I was bending. I can use them on my 80 if he doesn't want them or sell them to someone else.

The 80 sliders are for Matt assuming he still wants them.
Click to expand...

I might know of whom you speak...
 
BamaPaul said:
It was actually within an 1/8" of being the same length, so I cut the old flange off, took out a little bit more and then welded the flange from the 60 on. It was a lot easier that I was expecting.
Click to expand...

I forgot the front gets shortened. That's what I had done with mine too. What did you do for a rear shaft?
 
bhmmapping said:
I forgot the front gets shortened. That's what I had done with mine too. What did you do for a rear shaft?
Click to expand...

I went with the 1" aluminum spacer in the rear. Mine didn't need to be lengthened that much, and really I drove around with no spacer for a month or so.
 
bhmmapping said:
possibly. Someone(he can out himself if he wants) asked me about some and I had the tubes left over so I thought I would go ahead and build the rails while I was bending. I can use them on my 80 if he doesn't want them or sell them to someone else.

The 80 sliders are for Matt assuming he still wants them.
Click to expand...

I still want them if I am that someone you refer too.
 
bhmmapping said:
If you talk to him can you ask him if he would prefer the rub rails to be angled up or flat step style.
Click to expand...

I'm looking for step style with no tread plates.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom