The HJ61 24V Power Window Relay bypass , the way I did it. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 13, 2021
Threads
3
Messages
22
Location
Iceland
I had my HJ61 painted and recieved it with a Longer then needed bolts inside the driver door. When I tried to open the window it got stuck on the long bolt and the relay box failed ( burnt over ). Its almost impossible to get this box ( even if I just today got one from a generous friend :). ).

I am not a electrician so dont ask me to complicated questions about electricity :). This box is only there to control the Auto up and down of the driver window.

Friend of mine who is electrician he bypassed the relay box for me. Hi connected the driver window motor to the Rear Right window controller on the Driver door switch Control box. What this means is that the driver can NOT control the RR Window from the Driver Door Switch control box , he has to use the Rear door control switch to do that.

I hope that this will help someone who needs to do this mod. Below is a Drawing I made to show how it was done. Yes and please, if you have a better idea on how to do this please share.

Screenshot 2023-05-17 at 12.50.43.jpg
 
Last edited:

Users who are viewing this thread

Back
Top Bottom