O
oldgrey60
Guest
Purchased a new H55 tranny and prepping for change out. Has anyone tried installing higher gear ratio TC gears? Thought I would consider these since I have TC apart for H55 conversion.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I think there are a few sources for lower gears, but not higher ratios.
They going lower and higher with the Mark's gears but they are noisy from what I have read on here.
http://www.sor.com/sor/cat295.tam?xax=31922&page.ctx=cat295.tam
So you want a lower crawler gear?
http://www.sor.com/sor/cat295.tam?xax=31922&page.ctx=cat295.tam
So you want a lower crawler gear?
Marks4WD has a set of gears with a higher high (8% overdrive) coupled with a lower low (2.82 to 1 ratio) to fit your transfer. They also have a new style idler shaft with tapered roller bearings that they claim reduce gear noise.
rick_d is installing these in his cruiser, we should soon hear first hand report on his experience.
My early style Marks gears are indeed noisy in an open top 40, but Greg_B's early gears in his BJ60 didn't sound half as bad.
Dave
rick_d is installing these in his cruiser, we should soon hear first hand report on his experience.
My early style Marks gears are indeed noisy in an open top 40, but Greg_B's early gears in his BJ60 didn't sound half as bad.
Dave
I buy my Marks gears ( underdrive ) last year .. ( april for my birthday 
) and are very noisy no matter what .. but aren't nothing special, no more that MT tires sound.
) and are very noisy no matter what .. but aren't nothing special, no more that MT tires sound.