T3 Turbos for 3B

[dkroth]

If anyone wants one let me know and I will put together a parts list and cost analysis.

kraig

Kraig, I'd definitely like to take a look at what you come up with.

 

[FJn00b]

All right I have searched this forum extensively and read over a hundred threads on putting a turbo on a 3B and I still have a few questions about turbo selections. It seems as though a Garret T3 would be a good choice, there are alot of them available in different configurations on Ebay. There does not seem to be a consensus on what A/R and trim numbers are best. I want a DD that I can pull a snowmachine trailer with, no super rock crawling or anything like that. Can some one give me solid numbers to go by? I wish we had a sticky with turbo part numbers and specs and what they came off of, yes I know the info is probably here somewhere but it would be nice to have it consolidated. Thanks in advance for any help.

I have new T3 manifold and new garrett t3 turbo for sale.

[/URL]

[/URL]

 

[Spallet]

The exhaust manifold of 1998 npr and turbo(garret .67 turbine,.48compressor) will work on a later 3b engine ...

 

[Dougal]

The exhaust manifold of 1998 npr and turbo(garret .67 turbine,.48compressor) will work on a later 3b engine ...

There's a picture of that somewhere on here. The top manifold holes don't line up and were slotted out. The Isuzu manifold has a T3 flange but that particular turbo is actually a T25. It is the later 4BD2T turbo which has the smaller turbine housing and wastegate, the later 4BD1T's had a bigger housing with no wastegate.