Standard vs. Lifted Height Q's

[pdxlc200]

Hi guys, I currently have OME rears springs with OME Sport Shocks, plus Radflo front coil overs. From the center of my hub upwards to the lip of the wheel-well is:

- Front - 21.50 (was 22 when installed, but 600 lb springs have settled in 30 days)
- Rear - 23.25

I'm hoping to figure out the max I can lift my front without compromising the CV's. I recall a max of 2.5 inches from stock... but I can't seem to remember what stock height is. Anyone have a non lifted stock 200 that wouldn't mind doing measurements from the center of their hubcap upwards to the lip of the wheel-well? Thanks!

 

[mark71]

make sure they have similar tires and wheels.

 

[pdxlc200]

Rims and tires don't matter if they measure from the center of the wheel. = D

 

[elkaholic]

Hi guys, I currently have OME rears springs with OME Sport Shocks, plus Radflo front coil overs. From the center of my hub upwards to the lip of the wheel-well is:

- Front - 21.50 (was 22 when installed, but 600 lb springs have settled in 30 days)
- Rear - 23.25

I'm hoping to figure out the max I can lift my front without compromising the CV's. I recall a max of 2.5 inches from stock... but I can't seem to remember what stock height is. Anyone have a non lifted stock 200 that wouldn't mind doing measurements from the center of their hubcap upwards to the lip of the wheel-well? Thanks!

I'll measure my '13 this evening for you.

 

[pdxlc200]

Your awesome Sam, thanks!

 

[mark71]

Rims and tires don't matter if they measure from the center of the wheel. = D

, you're right.

 

[elkaholic]

Left front 19 7/16 inches and Right front 19 1/2 inches

Sent from my iPhone using IH8MUD

 

[pdxlc200]

Thank you!