ARCHIVE SoCal-Aluminum Tail gate storage (Pre sale)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 13, 2013
Threads
145
Messages
1,703
I made this a few months ago, it's fantastic, it's shiny, it will get you all the ladies and all Land Cruiser owners will envy you. I can guarantee it because it happens to me 20% of the time, EVERY TIME.

-3/16" aluminum 45* chamfer all around
-stainless steel countersink hex bolts, nut and washers
-stainless steel latches
-aluminum piano hinge flushed with surface

I have the one in the pictures for sale, it comes complete with all hardware listed above. $400 obo

I may consider making 3 INCOMPLETE DIY kit, it will not come with any hardware.
It will be cut out exactly like you see in the pictures, pre drilled mounting holes.
I can cut out the holes for the cam latches if you plan to use the same ones, if you want to use something else, I will not cut the holes. I can provide sources for hardware and directions to install.
You don't need a template to install this, all you have to do is place on top of your tailgate, use a few bolts for positioning, grab a sharpie and draw a line all the way around 1/4" - 3/8" from the aluminum.

DYI kit is $250 - need deposit before starting.


Trades possible, I'm looking for a rear bumper with swing outs + cash on my end.


20140704_202046_zpswpobpvj4.jpg



20140704_201913_zpsful2jez4.jpg




20140704_201724_zpskrs5btvt.jpg




20140704_202321_zpshbkrubh9.jpg






20140704_201801_zpsu7habj64.jpg






20140704_201807_zpsuag3ckte.jpg
 
Last edited:
Now that is BADA$$!! If I wasn't dropping a grand in other cruiser stuff at the moment I'd be all over this!
 
Bump for this. After seeing it person I guess I can say its kind of a cool alternative to WG. Warning though...it IS shiny! :flipoff2:
 
I have panel envy!

Nice product! Too bad I had already did mine a while back.
 
Yes I saw it in person too and it's very clean. Good idea to sell as kit! I'd be willing to buy one at some point.
 
send me your latches and I will have the latch holes cut out for install, thought this would be a good idea.
 
Does the DIY kit come with the hinge, or just the aluminum panels?
 
John, I'm seriously considering that offer :pHow are you doing? Have you move yet?
 
I have 4 coming, should be ready to go by next week if everything goes accordingly.
Who else is interested?

20141001_131012_zpsjkcdrbcv.jpg
 

Users who are viewing this thread

Back
Top Bottom