Selling my 67 FJ45LWB- SoCal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I bought this two months ago with intentions of restoring to original. Since then, my business has slowed down, and I really needs the funds back to finish my 55 resto-mod that I'm in the middle of. I bought this truck because it has all original parts. The body is in pretty good shape. The bed sides are in good shape and there is one rust hole near the pass wheel well. The tailgate was just fabbed by whomever was using it. The rear taillights are bad. It has a Wyoming Title that I have not transfered into my name yet(VIN FJ4527322). The truck was originally owned by Ellen Cotton who operated a ranch just north of Wyoming in Montana called 4 mile Ranch. I've got a few parts the came with the truck because the guy who got it from the ranch was accumulating them for a restoration also. List of Parts:
New Seat foam and covers from SOR.
New window rubber for front, rear and corner windows(front window cracked, the rest are ok)
New front 2-1/2"lift springs from SOR
Extra Set of Running Boards in better shape
1967 Wiring Harness from FJ40(original has rat damage)
New front Turn Signals and Running Lights
Extra door handle in great shape
Original Hub caps and a set of newer ones
2 extra Oil Filter elements
Extra 4spd, Transfer Case, Bellhousing and clutch from mid 70s LC
I've got a FJ55 front axle with FJ60 disc brakes that I will throw in also

It does have all the hooks and latches in the cab(one hook is from a different 45 but still original). The original dome light cover is still there and not cracked. The seats are in good shape(no parts broken off). Orginal wheels. Original inline water heater(block heater?)
I have not had a chance to try to start it yet. The guy I bought it from said it ran pretty smooth. It isn't drivable because the clutch and brakes are dryed up. I will delivery up to 150 miles.
Let me know
Pat
Carlsbad
760-419-2590
landcruisnman@yahoo.com

Arrival in Oceanside.webp
Driver Cab Corner Interior.webp
Backwall Interior Cab with Gas Tank.webp
 
goodness graciouse.......i see a lot of work
 
bump up for all the nice patina!

If I wasn't trying to reduce the inventory, I'd be seriously interested.

Good luck, someone's bound to want this rig.

Dan.
 
more pics after pressure wash

I blasted some of the dirt away that was caked on the underside so you can see the corners and floorboards underneath. There are no rust holes there. They look pretty good. The bumper is welded to the bed, but I'm going to cut it off and clean up the areas after. I'll post pics of that when I'm done. If you want any pictures of anything really close up, just let me know.
these pics are drivers side floorboard underneath and drivers side cab corner underneath.
Drivers Side Floorboard underneath.webp
Drivers side floorboard 2 underneath.webp
Drivers side cab corner underneath.webp
 
I think I'll take her home and try to get her running. If that isn't too difficult, I'll work on the clutch and brake masters so that it's street worthy. I know it's a tough time to sell anything right now. Any offers will be considered.
Later all
 

Users who are viewing this thread

Back
Top Bottom