Events/Trails Safety Inspections

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

OMW from Fallbrook
 
0DE148F1-7314-4995-A944-69B725C252BA.webp
2BB2A491-8C2E-439C-B9C8-D15E4DA21702.webp
7FFB2199-264B-4C7B-82E4-CF0D46DF5196.webp
7AA02701-4738-4624-AA23-CBE59C2973DE.webp
ACF6CB89-C783-4223-8D4F-28D7276D3FBC.webp
576138F4-D380-42BC-92A2-2720CC6D1E42.webp
727453A1-5866-4029-87AF-7E3594942979.webp
09050710-E953-4977-BD1D-E570688F2B51.webp
 
Thanks again Gus for the awesome shop time on Saturday for safety inspections. Lots of stuff learned in the process.
PS - Thanks also for the nitrogen charge up on my Icon shock reservoirs, the truck seemed to ride better on the drive to El Cajon and back to Escondido. I'll need to experiment with the shock settings to see if they make more of a difference now.
 
Well I needed rear wheel bearings and a pinion bearing, and when they pulled my 3rd member this came out. It wasnt making any noise (very minimal anyway), but had a tooth completely broken off, which probably caused the chip on the other tooth. So needless to say I had to get another gear set. Fortunately Pro Gear in KM replaced it at no charge and will go after Nitro to cover it under warranty, even though its not technically under warranty. I'm just thankful they were able to source a gear set during these times.

IMG_20220520_100415.webp
 
Wowza!! I'm surprised bigger chunks didn't come out when Gus pulled the drain plug!
Awesome on it being covered under warranty!
 
That's why we do safety inspections and have a guys like Gus to help us out.
 

Users who are viewing this thread

Back
Top Bottom