- Location
- United States
"Betsy build thread" - whole rig, running ans driving for $3000. (N/a now cuz she has lost quite a few parts..)
or parts....
Parts are in dixon ca , nor cal near bay area.
You pay actual shipping cost.
Pretty much anything you can think of.
Front end with rebuilt knuckles, 3.73s - $400
Rear end 3.73 - 200
Motor ~180k I think- 500
Tranny - 200
Split case with uninstalled full rebuild kit from Georg,- 400
15" pro comp black wheels with 32x11.50r15, bfg AT (90% tread) - 600
Fox remote res front shocks - 200 pair SOLD
Rancho rear shocks - 50 pair
Safari lift springs, shackles, shackle reversal - 500 SOLD
Bestop front seats with oem brackets installed - 500 pair SOLD PENDING FUNDS/PICKUP
Brown dash grab bar - 75
Ac/heater bezel - 50
Switches (customized fog light emblems)- 25 each
Steering wheel with cover- 100
Spare Dizzy (vacuum busted) - 100
Box tube front bumper 75% completed for an 8274,or any winch really - 200
Sliders (welded on) - 150
Banged up rear bumper (was a 4runner or Tacoma tg rear that I cut and widened) -100
Brand "new" gas tank and all associated new parts - installed at dealer last year under recall - 500
Trim, emblems, latches, etc...
Rear license light/emblem/housing - 75
Doors (only sheet metal that survived) - 150 SOLD (FRONTS PENDING FUNDS/PICKUP)
62 mirrors - 75 SOLD
I can't think of everything - door panels, handles, seatbelts, interior trim....
Thanks guys!!
Photos available upon request. I will check condition of items upon request. Just ask, I probably have it still at this point. I will post up as things get sold....
Rear doors sold (glass and metal only. Latches, handles and panels available).
Suspension sold.
Wheels/tires sold.
Mirrors sold.
Birfs sold.
Tranny sold
Front driveshaft sold
Bell housing sold
Flywheel sold
Throw out arm sold
Clutch pedal, master, and slave sold
Front doors sold
Front seats sold
or parts....
Parts are in dixon ca , nor cal near bay area.
You pay actual shipping cost.
Pretty much anything you can think of.
Front end with rebuilt knuckles, 3.73s - $400
Rear end 3.73 - 200
Motor ~180k I think- 500
Tranny - 200
Split case with uninstalled full rebuild kit from Georg,- 400
15" pro comp black wheels with 32x11.50r15, bfg AT (90% tread) - 600
Fox remote res front shocks - 200 pair SOLD
Rancho rear shocks - 50 pair
Safari lift springs, shackles, shackle reversal - 500 SOLD
Bestop front seats with oem brackets installed - 500 pair SOLD PENDING FUNDS/PICKUP
Brown dash grab bar - 75
Ac/heater bezel - 50
Switches (customized fog light emblems)- 25 each
Steering wheel with cover- 100
Spare Dizzy (vacuum busted) - 100
Box tube front bumper 75% completed for an 8274,or any winch really - 200
Sliders (welded on) - 150
Banged up rear bumper (was a 4runner or Tacoma tg rear that I cut and widened) -100
Brand "new" gas tank and all associated new parts - installed at dealer last year under recall - 500
Trim, emblems, latches, etc...
Rear license light/emblem/housing - 75
Doors (only sheet metal that survived) - 150 SOLD (FRONTS PENDING FUNDS/PICKUP)
62 mirrors - 75 SOLD
I can't think of everything - door panels, handles, seatbelts, interior trim....
Thanks guys!!
Photos available upon request. I will check condition of items upon request. Just ask, I probably have it still at this point. I will post up as things get sold....
Rear doors sold (glass and metal only. Latches, handles and panels available).
Suspension sold.
Wheels/tires sold.
Mirrors sold.
Birfs sold.
Tranny sold
Front driveshaft sold
Bell housing sold
Flywheel sold
Throw out arm sold
Clutch pedal, master, and slave sold
Front doors sold
Front seats sold
Last edited:
and matching smittybilt bolt in center console (with hardware).
