Replacement seats, LX 430?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Azca

If there is a harder way - I will find it...
Joined
Oct 25, 2007
Threads
140
Messages
1,899
Location
Surprise AZ.
I was in a buddy's LS 430 the other day and noted that the seats are fairly narrow and believe they may fit in the 80. Anyone tried this yet? Ventilated and heated seats sure would be nice. Still have other things on my to do list but always looking to accumulate parts as they come available.
 
Last edited:
I'm going to assume you either meant an LS430 or and LX470. Which is it?
 
Regardless of which Lexus model you have..... you will need to measure them yourself as no one on here is going to be able to tell you definitively. Seat swaps are still very much in there infancy with these trucks. I believe this is due to the fact that almost anything you want to use will have to be adapted down to the relatively small frame width ( about 13.5'' ) of the 80 series seat rails.
 
Sorry, LS430.
 
Reviving this thread. I love the 80 and 100 Series and have owned both, but the seats for me are too short on the bottom cushion. Has anyone to this point swapped in LS430 seats or any other seats that have extending seat bottoms in these trucks? At this point I'm leaning to just buying an LS430 over a Cruiser because I just can't get comfortable in the seats.

I've seen a few 80 Series seat swap threads, but didn't find any for a 100 Series.
 
Last edited:
At this point I'm leaning to just buying an LS430 over a Cruiser because I just can't get comfortable in the seats.

Those are not very comparable products
 

Users who are viewing this thread

Back
Top Bottom