Hey this kinda a stupid question but it's giving me some issues, maybe some 60's guru's can help me out. I'm trying to remove the bottle jack mount in the rear quarter panel but it's giving me some issues, I only had a quick look but I removed the 2 bolts that are directly under the bracket. I gave it a good tug after that and it seemed pretty solid still. Is there a hidden bolt that I'm not seeing or is there a little trick to pulling it out? Any help is appreciated. A search of the forum proved unhelpful.
Removing Bottle Jack Mount
- Thread starter canadianmedic2
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I actually did this not that long ago. There is another 2 bolts that you have to get up under the truck to take off. That mount goes almost all the way down inside the body panel. Kind of overkill for a jack mount, but it is a Toyota.
Wile E Coyote
Out in the streets, they call it murder!
To find the bolts, look up from the wheel well, if I recall.
- Thread starter
- #4
Thanks guys,
I pulled that sucker out last night. I figured I had to have been missing something ,it seemed too solid after I pulled out the two bolts from inside.
I pulled that sucker out last night. I figured I had to have been missing something ,it seemed too solid after I pulled out the two bolts from inside.
