- Location
- United States
Rebuilt 3B-2. Rotary pump and roller cam engine from 1990.
Head:
New valves, guides, seals, springs, pre-cups.
Block:
Bored to first oversize
New pistons, rods reconditioned (big end resized, new pin bushes)
Crank ground to first under size, new taiho bearings
Cam/lifters reused with new bearings.
New oil pump drive and driven gears
Rotating assembly balanced including front pulley and flywheel.
Block drilled and tapped for turbo oil return.
Fuel pump and injectors rebuilt.
New glow plugs (for 12v system)
Includes later power steering and alternator mount (no alternator)
4900 With AXT turbo kit installed
OR
4600 With 14B-T turbo manifold (no turbo - has ct-26 flange)
I have other parts that could be combined with this (starter, 5 speed with or without transfer (used or rebuilt), possibly other conversion related items.
Head:
New valves, guides, seals, springs, pre-cups.
Block:
Bored to first oversize
New pistons, rods reconditioned (big end resized, new pin bushes)
Crank ground to first under size, new taiho bearings
Cam/lifters reused with new bearings.
New oil pump drive and driven gears
Rotating assembly balanced including front pulley and flywheel.
Block drilled and tapped for turbo oil return.
Fuel pump and injectors rebuilt.
New glow plugs (for 12v system)
Includes later power steering and alternator mount (no alternator)
4900 With AXT turbo kit installed
OR
4600 With 14B-T turbo manifold (no turbo - has ct-26 flange)
I have other parts that could be combined with this (starter, 5 speed with or without transfer (used or rebuilt), possibly other conversion related items.
