Wanted Rear window glass bottom channel (1 Viewer)
- Thread starter Pighead
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
bobm
WTF, WTF, WTF!!!!
I made a couple, but you would need the fact toree hardware. 
. Would have to check 
. Would have to check - Thread starter
- #3
Yes. Please do. I have all the routine attachment stuff, except for the little clip that used to be welded to the bottom of this channel.Would have to check
bobm
WTF, WTF, WTF!!!!
I'll check tomorrow. Keep pestering me i forget my name sometime 
What is the best way to remove/install these metal channels. My rear driver's side is slightly forward which gets hung & knocks the window off track.
bobm
WTF, WTF, WTF!!!!
forgot again. I'll write me a note 
.
Blastservices
SILVER Star
You will need to buy the sash rubber from SOR. The glass should have some witness stains showing where it originally sat in the sash. Squeeze the sash with some pliers and don’t get to carried away. Install new rubber channel and tap sash onto glass with dead blow mallet gently
Last edited:
- Thread starter
- #8
Bob, read your note.
- Thread starter
- #9
The best way? I only know of one way.
Put the tip of a screwdriver on the bent tab of the locking tab, hit the other end of the screwdriver with a hammer, sliding the locking tab out of the three bent clips . It pretty much falls apart after that
bobm
WTF, WTF, WTF!!!!
Looked but couldnt find it. I can try again!
Did you ever find a window channel?
I've got at least 2 here if you still need one.
I've got at least 2 here if you still need one.
- Thread starter
- #12
No. I did not find one. Yes, i do still need one.
If you've got at least one, let's talk...
How about $60 plus whatever it costs to ship it...
I can box it and ship it tomorrow.
