Prado Speed signal (1 Viewer)

[Dariusz]

I like to install en my Meru (Prado 2 doors) the clino, compass, etc. gadget, but I need to know wath is the cable (color, etc.) that I can use for the speed signal.

Thanks in advance

 

[-MaTTi-]

If it´s same kind of what 4Runner have, it´s green-red. The wire which is most left. Check this: http://toyotasurf.asn.au/forum/viewtopic.php?t=10345

Hope it helps.

 

[Dariusz]

Thx for the ansver, but I´m not sure... the instruction you say talk about the cables that come from the transfer, but I think that the signal that I need is a ecu signal?

 

[-MaTTi-]

Aha... sorry I didn´t recognized your purpose. This is what you mean?: https://forum.ih8mud.com/showthread.php?t=127858

 

[Dariusz]

Exact this is the unit (the las one green/black) but in the diagram dont say the cables colors or the speed sensor signal

 

[TEPUI]

Dariuz,

Hopefully this will help. This illustration shows the cable colors if you look at the dome from the back. I've copied the colors from the cable I got from Toyota (see attachment)

 

[TEPUI]

This is the cable and connector in the same position as I used to create the top illustration showing the cable colors: