Hi all,
Still own crusier and LX
Here is the story.
Driving on rainy day, all is smooth and fine. I make a turn and battery disconnects causing truck to crap out completely and roll to a dead stop. After I figure out connection issue I start truck but now has misfire and vsc lights on.
Tried reset electronics, pulled both + and _ on batt still no fix.
Runs like butter over 2k rpm. low rpm and low rpm high load make it really bad.
where to start? I thought of using timing gun on each plug wire to see if coil is bad>would that work? any help is appreciated!
Still own crusier and LX
Here is the story.
Driving on rainy day, all is smooth and fine. I make a turn and battery disconnects causing truck to crap out completely and roll to a dead stop. After I figure out connection issue I start truck but now has misfire and vsc lights on.
Tried reset electronics, pulled both + and _ on batt still no fix.
Runs like butter over 2k rpm. low rpm and low rpm high load make it really bad.
where to start? I thought of using timing gun on each plug wire to see if coil is bad>would that work? any help is appreciated!
