PLEASE help me identify this fj80 transmission hose

[oakryder]

I need assistance identifying a transmission oil cooler hose. I can post a pic later but i think someone will be able to identify it by description. I have a 1997 landcruiser. The hose I need to replace is connected to a metal tubing on the left side of the motor. The hose travels under the area of the belts the has a bend at the end then goes into a small brass nipple that is screwed into the bottom of the radiator just off center to the right. I have all sorts of diagrams but nothing looks like the hose i need. Any help would be greatly appreciated. Thanks

**The yellow hose in the image below**

 

[silverhorse]

What exactly do you need to know? I would think you could go to any auto parts store and get trans hose... replace it with the appropriate size and gets some small radiators clamps to secure it...

 

[oakryder]

I was looking for the part number. The hose has a 90 degree bend in it and if I just replace it with a straight section of hose it may crimp. The hose also has a thick rubber protective cover on it.

 

[silverhorse]

I doubt you would have any trouble with it crimping but if you want the part # call Toyota. Look up Beno on here he works at American toyota in New Mexico......

 

[oakryder]

thanks

 

[David Rodgers]

I'm looking for the same part. I know that these are the 4 transmission lines:
32941-60110
32943-60121
90445-17102
32943-60051

Just can't figure out which one.

I've heard that you can use Gates hose for all of the others (from where ever) but the 90 degree bend is hard to make on the last one.

If anyone knows which one out of the three it would be awesome. I've google each one but can't seem to get a good pic.

I'll buy gates for the 3 but I'll probably purchase the formed one.

Thanks,

 

[Pirate0187]

Here ya go

 

[David Rodgers]

Thanks so much. That's perfect.