Pic request 285's/no lift/Front ARB Bullbar

[cc93cruiser]

To hundy series hall monitors, I searched.. Don't wont nothing to do with lifting my 99 cruiser, I already have 285's bfg at's. About to purchase an ARB and was wondering just how low the front end will drop even more with the extra weight of the bullbar and possibly later down the line a winch. It seems like my 285's hardly have any clearnace as it sits. I know I can crank the torsion bars a bit, but I just had an alignment done and I don't want to mess with that right now.. Thanks inadvance! Robert..

 

[fireball]

You can measure the front height now add bumper then crank bars back to original height and alignment should be the same.

 

[FlammableFishie]

You don't want to add a bumper and winch without touching the tbars

 

[cc93cruiser]

Ok gotcha ya... When cranking the t bars, approximately how much lift do you gain per full turn? Also you turn clockwise to gain lift right?

 

[Mxndrnks]

Ok gotcha ya... When cranking the t bars, approximately how much lift do you gain per full turn? Also you turn clockwise to gain lift right?

It really varies. There is a great thread in the Faq that will walk you through it. Start there. Any questions, post in that thread and we will respond. That way we can keep it together.