petronix

[tackdog]

Hi. I have a simple question (as I lost the instructions for my petronix kit)

Where does the red and black wires connect to?

I have a 78 model 2F.

cheers!!!

 

[mr_manny]

The red wire from the module is connected to the positive side of the coil. The black wire is connected to the negative side of the coil.
found it at the following site:
http://www.vintageperformance.com/retrorockets/gm.htm

BTW,
Be careful not to leave the ignition key ON when running a pertronix (motor OFF).
I believe this was also in the instructions you lost