Parting out 93 fzj80- 1fz-fe engine - trans - xfer case - axles - body -

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 18, 2006
Threads
61
Messages
221
Location
United States
I've decided to part out my 93 Land Cruiser after a collision with a drunk driver. It was a high (42 inch) pass. side hit from a truck.

Location: Waterville Ohio 43566 - 2 hours west of cleveland - 1 hour south of detroit

175,192 miles

Prices Listed Below.
No price ? Make me an offer.
Large items are available for pickup.

I accept paypal
  1. 1FZ-FE ENGINE SOLD
    Transmission $450
    Transfer Case - $450
    Lower Tail Gate - Red - $125
    Alternator - $40
    Power Steering Pump - SOLD
    Power Steering Reservoir - $20
    Rear Rotor - SOLD
    Rear Caliper - SOLD
    2nd Row Gray Leather Seats - $60 each NEW LOWER PRICE
    4 Power Door Lock Actuators - $45
    4 Exterior Door Handles - $20
    3 doors
    2 Catalytic Converter Housings - no guts - SOLD
    KYB Gas-A-Just Shocks - $20 each
    Front Wiper Motor - $45
    Dash Pad - gray - $60
    Dash Pad Support - gray - $30
    Shifter Console - gray with leather boot - SOLD
    Trailer Hitch

    ECM - SOLD
    Front Axle - SOLD
    Front Seats Gray Leather - SOLD
    3rd Row Gray Leather Seats - SOLD
    Y pipe - SOLD
    O2 Sensors - SOLD
    2.2 kw Heavy duty starter - SOLD
    Power Steering Gearbox with Pitman Arm and Sector Shaft- SOLD -
    Four 30mm Man-A-Fre Coil Spacers - SOLD
    Rear Wiper Motor - SOLD
    Front Driveshaft - SOLD
    Rear Driveshaft - SOLD
    Down Pipes - SOLD
    Complete Instrument Cluster - SOLD
    Tail Lights R & L - SOLD
    Rear Bumper $
    Rear Bumper End Caps $
    Rear Bumper Fascia - aluminium - $$20
    Engine Wiring Harness - $35
    Dash Wiring Harness - $40
    Gray Glove box - $20


    Seat Belts - $35 each
    Driver's & Passenger's Doors - Red -
    Interior Door Panels - Gray Leather - $40 each
    Fender Flares - Red
    Computers, Sensors, Actuators
    Distributor - $80
    Ignition Coil and Module - $75
    Cruise Control Actuator & Module

    Lift Gate Glass - Tinted

    Sunroof Glass - $45
    HeadLiner - gray
    Roof Rack
    Interior Panels - gray
    Carpet - Dark charcoal

Thanks,

Paul Mohr
Waterville, Oh 43566
 
Last edited:
how much for the rear axle ........ actually all I need is 3rd. and will the roof rack fit a 60? how much for that?
 
If your chopping up the body, I can use a chunk of rocker on the drivers side. Right in front of the back wheel. I can get pics , just let me know if you cutting it up.

thanks,

bob
 
If your chopping up the body, I can use a chunk of rocker on the drivers side. Right in front of the back wheel. I can get pics , just let me know if you cutting it up.

thanks,

bob
Send me a photo of what you need and I'll get to it this weekend.
Paul
 
how much for the rear axle ........ actually all I need is 3rd. and will the roof rack fit a 60? how much for that?
$500 for the whole thing, wheel to wheel, but I keep the wheels. It's still under the truck right now. But that's everything including brakes, axles, housing, 3rd member. Sealed up and ready to install.
$300 if I have to pull the 3rd and ship it.
I don't know about the rack. You can have it for free if you pull it when you come down to pick up the rear axle.
Thanks,
Paul
 
if you still have the disc brake master. let me know how much and shipping to 92583

Thanks
 
Shoot me a PM if you have the battery box & mounting bolts - shipped to 49424
 
Looking 4 ps fender.
 
im looking for the fender too

the p.s. fender went through the windshield. By now it's probably reincarnated as a mower deck. I don't think you'd want it.
 
What Series is the muffler and how old is it? What kind of shape is it in, have a pic? Also what is the pipe size going in and out.
 
Last edited:
Flowmaster Muffler pic - for Lumberjack

This flowmaster was on my truck 4 months before I got hit in the front fender by a drunk driver. The truck has been sitting in the garage since December as I'm continuing to part it out.

It's a Flowmaster 40 Series . It has 2.50" offset inlet / 2.50" offset outlet.

Here's a pic. Let me know if you still want it.

paul
2008_1027_182203.webp
 
Back
Top Bottom