Parting Out parting 93 FZJ80 in mid GA

[slow95z]

Location

United States

ok, now i know this thing is mostly shot out but i thought some of you could use some parts. it was hit in the rear and rolled. drive train is gone but i do have an engine that has 295K on it with a popped head gasket and the transmission and transfer that came with it. if you want the tranny and engine then send me a PM and i will make you a great deal on them.

 

[6894kevin]

how much for the raised center console lid top thingy? to 29672?

 

[Strand4x4]

Floor mats?

 

[slow95z]

PMs sent.

 

[70rtconv]

Dash pad any good? Interested if it is. Will PM you.

 

[slow95z]

well i got some pics of the dash for 70rtconv but it is not perfect so he doesnt want it. cant blame him but i am going to post them here for anyone else who might want it. will make you a great deal on it. other than the tiny cut on the passenger side near the vent it is fine.

 

[lp2k]

Looking for a rear crossmember harness

It is labeled 82163 in the pic below

Also can you check if it had lockers ? If so PM me as I need another harness if it still present

 

[kbFJ60]

interested in the signal light lever and shifter console and shifter w/ the metal plate let me know kune26@icloud .com

 

[slow95z]

PMs sent.

 

[slow95z]

sold a few parts off the inside, also working on getting the wiring harness pulled out for lp2k.

 

[R.E.M.]

Can I get a price for all A and B pillar grab handles with hardware to 64151? While you're there can you get a measurement on the mount hole spacing? I've heard they're the same as 60s but would like to confirm.

 

[slow95z]

all of the grab handles are missing the covers for the screws. do you need those also?

 

[R.E.M.]

That would be nice, but if the price is right I can live without them.

 

[slow95z]

ok, i will go get you some pics of them this afternoon or tomorrow.

 

[Kfire01]

I sure need the front exhaust manifold if you are interested in letting it go.

 

[slow95z]

well the grab handles are now gone. still a few more good parts on this truck. next week i will be cutting it up and pulling the rest of the wiring harness out. if you need any pieces that need to be cut off let me know.

 

[lp2k]

Do not cut the harness up. Please disconnect the connections as you go.

 

[landcruiserjunky]

circular air box? PM me

 

[slow95z]

Do not cut the harness up. Please disconnect the connections as you go.

dont worry, i am slowly taking them out but some got a bit of damage from the roll over.

 

[mlv289]

Is the rear hatch glass still useable?