Parting 1996 FZJ80 with factory lockers

[idahorover]

Looking for the interior tailgate latch (black plastic thingy).

Keeping the interior parts, thanks for the interest.


Dana

 

[idahorover]

If it didn't go with the locker axles, I need the chassis side wiring harness connector that plugs into the rear locker harness.

Sorry, I clipped that connector and sent it with the axles.


Dana

 

[idahorover]

have the top part of the air cleaner available?

Sorry I missed your post I did not get notifications on posts to this thread for this last week. Yes, I have the air filter housing. I was hoping to sell it as a unit, I am open to offers however.

 

[idahorover]

Steering stabilizer and frame bracket please. PM for arrangements.
If for some reason front axle is parted - both steering arms, bent is OK.
Thanks.

Stabilizer and bracket went with the axles.

Thanks

 

[hamishpotter]

Hey Dana thanks for getting back,

I've been meaning to test the switch before picking one up, but a replacement is likely so I'd pony up $25.

I live in 11249.

Let me know, and thanks again,

James

 

[idahorover]

Hey Dana thanks for getting back,

I've been meaning to test the switch before picking one up, but a replacement is likely so I'd pony up $25.

I live in 11249.

Let me know, and thanks again,

James

I'll pull the switch and verify the function and report back. If you want to PM your email I can send you a photo and you can confirm the condition before you purchase.

Dana

 

[NLXTACY]

Radiator overflow tank and mounting bracket? I'm making an aluminum tank but I can't be without mine for weeks at a time

 

[idahorover]

Radiator overflow tank and mounting bracket? I'm making an aluminum tank but I can't be without mine for weeks at a time

Yes I still have the tank. I have not looked at it critically to assess the condition; will check and advise.

 

[NLXTACY]

To be honest condition is unimportant. I just need it as a proxy to send to Ron Davis Radiator to make up one in Aluminum. I will need the bracket it slides onto as well.

 

[NLXTACY]

oh oh, while we are at it...power steering reservoir? I need to have a bracket made and tig welded but I need another proxy

 

[idahorover]

oh oh, while we are at it...power steering reservoir? I need to have a bracket made and tig welded but I need another proxy

That makes perfect sense to me, I will have to confirm in the AM if I have the brackets, pretty sure I have them both though. Be thinking what they're worth to you, I don't really want to chase after market values on the net for odds and ends.

Dana

 

[NLXTACY]

Well they are only worth a couple of hours of utilization to me and I will basically just wind up tossing them after so its hard to say. Again, condition is meaningless. SOR, just down the street from me, is $110 for both used. If you are cool with $50 I'd even send them back to you after I'm done with them in a couple weeks

 

[idahorover]

Well they are only worth a couple of hours of utilization to me and I will basically just wind up tossing them after so its hard to say. Again, condition is meaningless. SOR, just down the street from me, is $110 for both used. If you are cool with $50 I'd even send them back to you after I'm done with them in a couple weeks

That works for me.

 

[NLXTACY]

That works for me.

PM me PP info

 

[ontopofm]

Still have the subwoofer bracket? Please pm me

 

[idahorover]

Still have the subwoofer bracket? Please pm me

It must still be in there I never looked. Do you know if its a 6" or 8" woofer? If its an 8" I'll probably keep it.

Thanks,

Dana

 

[jonb96150]

Starter available? To 96150

 

[idahorover]

Starter available? To 96150

Starter and Transmission pattern select switch are SOLD