For Sale Part Out - Sage 40th 80 Series

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.
cathaan said:
Hey Nolan, I might have missed it but do you still have the front passenger side fender by any chance?
Click to expand...

I have it. No flare. No rust.

Pm me with your address, we will figure what it will cost to ship the beast.
image-3469448545.webp
 
Start from the bottom, you already removed the stereo bezel. There should be exposed screws going to the lower horizontal panel that holds a few switches. There are a couple more on the left side where the fuses are. once the lower panels are out you should see a few fasteners for the upper bezel that surrounds the cluster. There are 3 more that point vertically into the dash cover. This should allow you to remove everything, exposing the structure behind the plastic. You will see the fasteners holding the gauge cluster, and once these are out you need to unclip the speedo cable on the back, and the unit should come right out. The glass clips onto the cluster, but is rather brittle. No ideas on removing the trip odo. I'll take the whole cluster if its better for you.
 
I need a radiator overflow reservoir ship to 84790.. thanks...
 
jojobeed said:
Finally got the headlights, took a week longer than expected due to midwest bad weather.

One arrived in great shape... the other :mad:

Mounting tab is completely broke off, loose in box. An adjustment screw was protruding from box about an inch.

Going to take some work but I think I can do some surgery and put my plastic assembly to the glass lens and make an intact assembly. Can this be done :confused:

The perils of FedEx and not enough packing material.
Click to expand...


Got a refund finally and sent you what they sent me. Sorry about the breakage.
 
Got the lens and cluster, polished it up with headlight restore and looks great. Thanks for he quick pull and ship.
/Users/adambailie/Pictures/iPhoto Library/Originals/2012/Mar 24, 2012/IMG_0026.JPG
 
Do you still have the sliding piece underneath the moonroof? I don't know what you call it, but the part that you pull in and out to expose the moonroof.
 
rockrod said:
how about the engine air cleaner assembly?

I am looking for the top and bottom or as complete as possible.

zip is 80134

thanks!
Click to expand...

I have the entire thing.

$50 plus shipping. PM me your address, Ill get you a quote.
 
goheel said:
Do you still have the sliding piece underneath the moonroof? I don't know what you call it, but the part that you pull in and out to expose the moonroof.
Click to expand...

I should, I did not sell it. I took out the rigid liner so it is either on the liner or still attached to the roof, I will check.
 
Status
Not open for further replies.

Share this page

Back
Top Bottom