Part Number for 2015 Map Light Lens / Cover

[stonepa]

All - looking for the Toyota part number of the clear one piece plastic cover / lens that covers the front map light in my 2015 200. Broke mine yesterday and, after an hour looking , no luck on finding the part number for specific part.

 

[lx200inAR]

All - looking for the Toyota part number of the clear one piece plastic cover / lens that covers the front map light in my 2015 200. Broke mine yesterday and, after an hour loking, no luck on finding the part number for specific part.

Doesn't look good, the part you are looking for is labeled NO4 and the note says "This part is not available for service".

Here's the link to the PartsOuq page.

 

[stonepa]

Doesn't look good, the part you are looking for is labeled NO4 and the note says "This part is not available for service".

Here's the link to the PartsOuq page.

Nice - so i can get a random replacement washer number but no for the plastic lens? Bummer..

 

[bloc]

Yikes. I only see the whole assembly available.. for $600+

 

[lx200inAR]

Yikes. I only see the whole assembly available.. for $600+

Nice - so i can get a random replacement washer number but no for the plastic lens? Bummer..

There is a tan one on eBay right now for "only" $250.

 

[stonepa]

Sounds like the fix is a small piece of clear packing tape. Bummer. The little clips on the lens are so brittle they break when simply removing to change a bulb. Can’t believe there isn’t a replacement when there is for every other interior light.

 

[lx200inAR]

Sounds like the fix is a small piece of clear packing tape. Bummer. The little clips on the lens are so brittle they break when simply removing to change a bulb. Can’t believe there isn’t a replacement when there is for every other interior light.

Adding for future readers. I don't believe you are supposed to pull that cover off to change the bulbs. You are supposed to drop the whole dome light and replace from behind. You remove the screws that are undercovers in the sunglass pocket, then pull the clips. You can see there is access for all the bulbs here.

 

[stonepa]

Adding for future readers. I don't believe you are supposed to pull that cover off to change the bulbs. You are supposed to drop the whole dome light and replace from behind. You remove the screws that are undercovers in the sunglass pocket, then pull the clips. You can see there is access for all the bulbs here.

Interesting. My 2015 user manual shows removing the lens. I think it would be a a lot of work to drop the whole thing. Maybe the 2016+ is different?

 

[lx200inAR]

Interesting. My 2015 user manual shows removing the lens. I think it would be a a lot of work to drop the whole thing. Maybe the 2016+ is different?

It's just 2 screws and then it pops out.