P Y S III
- Thread starter booty
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Did you call John?
He said he would help
There's no shame in asking for help
He said he would help
There's no shame in asking for help
I don't have any flux core he can use.
I do have to re-wire my fan. The taurus fan killed the fan switch.
I also have a bunch to do to get the 45swb out of the shop in two weeks.
I do have to re-wire my fan. The taurus fan killed the fan switch.
I also have a bunch to do to get the 45swb out of the shop in two weeks.
I didn't dislocate my shoulder but i did something to it a while back. Its been killing me a lot and I need to get that checked out soon. It sucks to be getting old.
I had some good luck last weekend and was able to get one inch spacers on the front springs thanks to some help from the bro at the dealership. Don't know if anyone noticed but my truck's ass end was way up there. Much improved stance now and more clearance for the sliders that should arrive this week. I ordered slider parts (outriggers) from Bump it Offroad which need to be welded together. So guess what I will be doing this weekend? I have to admit that I have been a little gun shy about wheeling since Bill worked tirelessly for the whole tech day fixing my rocker panels. In fact I promised him I wouldn’t wheel again until the sliders were on there. He did a super job and I owe him a huge thanks. By the way, Mike Smith at Bump it is a great guy to work with.
Even with not having the sliders, I still wouldn’t have been able to make the last wheeling weekend. I appreciate that quite a few seemed to have missed me as I see there is a plethora of banter on here about my gutters and garage door. Believe me, it was a ton of work to get ready for these guys and if anyone really needs to know the intimate details of the drama they can send me a PM and I’d be glad to fill them in. Not!
The new door will be awesome, especially in the winter.
Oh…and one more thing to fix before the trip…somehow the wire going to my temp sending unit snapped and my temp gauge doesn’t work. That definitely needs fixed…and then I am sure I will find a few more things as well. Oh Happy Prep for PYS Days!
I had some good luck last weekend and was able to get one inch spacers on the front springs thanks to some help from the bro at the dealership. Don't know if anyone noticed but my truck's ass end was way up there. Much improved stance now and more clearance for the sliders that should arrive this week. I ordered slider parts (outriggers) from Bump it Offroad which need to be welded together. So guess what I will be doing this weekend? I have to admit that I have been a little gun shy about wheeling since Bill worked tirelessly for the whole tech day fixing my rocker panels. In fact I promised him I wouldn’t wheel again until the sliders were on there. He did a super job and I owe him a huge thanks. By the way, Mike Smith at Bump it is a great guy to work with.
Even with not having the sliders, I still wouldn’t have been able to make the last wheeling weekend. I appreciate that quite a few seemed to have missed me as I see there is a plethora of banter on here about my gutters and garage door. Believe me, it was a ton of work to get ready for these guys and if anyone really needs to know the intimate details of the drama they can send me a PM and I’d be glad to fill them in. Not!
The new door will be awesome, especially in the winter. Oh…and one more thing to fix before the trip…somehow the wire going to my temp sending unit snapped and my temp gauge doesn’t work. That definitely needs fixed…and then I am sure I will find a few more things as well. Oh Happy Prep for PYS Days!
Shoulder pain............have you had your heart checked since this pain?
Upper body discomfort with out chest pain can be a classic sign.......just sayin.
Burned up my brand new fan switch with the last trip. Damn Taurus fans. Re-hooked up my switch and it works good as long as I turn it on. I installed a new coolant gauge so hopefully I can see when it gets hot and I can see what hot really is in real numbers instead of the Toyota gauge that doesn't have numbers and wasn't accurate.
I just need Tony to remind me to turn the fan on.
When it's on it stays right at 190*
If I can find another relay I'll hook up the high side of the fan too for those times when low might not be enough. Like when Tony doesn't remind me to turn the fan on. Unfortunately, I lent my high side relay out on the last PYS and I think the truck got sold with the relay on it.
I just need Tony to remind me to turn the fan on.
When it's on it stays right at 190*
If I can find another relay I'll hook up the high side of the fan too for those times when low might not be enough. Like when Tony doesn't remind me to turn the fan on. Unfortunately, I lent my high side relay out on the last PYS and I think the truck got sold with the relay on it.
You should have reminded me to take it off the truck
Lemme know bitch. I should be able to find some time this weekend to help.
WARNING: (as you know) if its anything filler or coatings, im slow and stupid, but willing to help out my one armed bud with a full sack.
Its no fun when you "zing" yourself
SEE!!!!!
I do have to get some primer on the bare metal parts, but I should be able to do that. No filler.
I also gotta get to the pick and pull and get a steering shaft.
I found two high amp relays and sockets today so I have high speed and a spare.
I gots some steering shafts for a mini.....will that work?
I can bring it to PYS...
do you need it before then?
Prolly wont work anyway
Nevermind
I can bring it to PYS...
do you need it before then?
Prolly wont work anyway
Nevermind
This would have been 4 post and at least an hours work on your old dial up network. We are going to have to put a post limit on your account now
Sorry....do all my mud surfin from the driod
I have a wife & a teenager. I don't get to use the home computer
I have a wife & a teenager. I don't get to use the home computer