Wanted Oregon:2F engine or good block wanted

[FJ502]

Vehicle Model

1. 40 Series
2. 60 Series

Looking for a good 2f engine for my 1977 FJ40, I’ve got friends all over the US so I can probably arrange transport but ideally somewhere within 500 miles of Portland, OR.

I currently have 2 blocks that need to be bored, trying to avert that process and find a good runner, or a good block that I can put my rebuilt head on.
I have a new carb and everything that bolts to a 2f

Thank you!

Andy

 

[rustED71]

Looking for a good 2f engine for my 1977 FJ40, I’ve got friends all over the US so I can probably arrange transport but ideally somewhere within 500 miles of Portland, OR.

I currently have 2 blocks that need to be bored, trying to avert that process and find a good runner, or a good block that I can put my rebuilt head on.
I have a new carb and everything that bolts to a 2f

Thank you!

Andy

I have a 2F...i dont know much about it other than it came in my 71' FJ40 when i bought it. We were able to fire it up and it ran for 30 seconds or so just feeding it fuel out of a pop bottle lol, not bad for needing a carburetor rebuild. I have a video of it firing up on my build thread post #3:

1971 FJ40: project Milk Money

So this story starts out like alot of others. I've had alot of Toyota mini trucks and 4runners in the past, but always wanted an FJ40. My girlfriend was talking about always wanting a Jeep, her father had one when she was growing up. I showed her some pictures of some FJ40's and was able to...

forum.ih8mud.com

I'm not looking to get anything for it, just want it gone as I need the space, I already have a 5.3/4L60E I plan to swap in. Let me know if you are interested, I am about 3-1/2 hrs away in Pasco, Wa 99301

Thanks Eddie-

 

[jkdur728]

I have several blocks, complete engines located in Virginia

 

[FJ502]

I have a 2F...i dont know much about it other than it came in my 71' FJ40 when i bought it. We were able to fire it up and it ran for 30 seconds or so just feeding it fuel out of a pop bottle lol, not bad for needing a carburetor rebuild. I have a video of it firing up on my build thread post #3:

1971 FJ40: project Milk Money

So this story starts out like alot of others. I've had alot of Toyota mini trucks and 4runners in the past, but always wanted an FJ40. My girlfriend was talking about always wanting a Jeep, her father had one when she was growing up. I showed her some pictures of some FJ40's and was able to...

forum.ih8mud.com

I'm not looking to get anything for it, just want it gone as I need the space, I already have a 5.3/4L60E I plan to swap in. Let me know if you are interested, I am about 3-1/2 hrs away in Pasco, Wa 99301

Thanks Eddie-

I’ll dm you, this could be perfect!!!

 

[vbvagearhead]

I’m in Virginia and I have a good block with rolling assembly out of an 85 FJ60. I saw it run when I bought it 4 years ago for a 2fe project. It is in excellent condition. Still has hash marks in the cylinders and has been covered and stored inside since I’ve owned it.

 

[cruisermatt]

I’ve sold +30 pairs of 60 series LS swap motor mounts to the PNW in the last two years, so I would imagine there’s a few takeouts in your area?