I am game...Ramon is that a 5 speed tranny??
ONSC HAMOM Signup
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Jan 16, 2003
- Threads
- 345
- Messages
- 3,649
- Location
- Charleston
- Website
- www.oldenorthstatecruisers.com
- Thread starter
- #42
I don't believe so, I believe the H55 was toyota's five speed.
where did you find this tranny at???
Several vendors sell them:
http://www.sor.com/sor/cat062.tam?xax=3100&page.ctx=cat062.tam
http://cruiserparts.net/parts/fj40.htm
http://www.sor.com/sor/cat062.tam?xax=3100&page.ctx=cat062.tam
http://cruiserparts.net/parts/fj40.htm
Looking to join you at a wrenching...
But if one isn't happening soon, I need some advice on who (mechanic/shop) to bring my 80 for some brake work. Fronts are shot (suprise!) Would this be a good time to put in the braided lines? I used to live in Apex and the folk at Apex Automotive did a good job with my wife's Subaru's brakes and tires for both. Now live in Durham and want to save a drive if possible.
Thanks for any and all your help
But if one isn't happening soon, I need some advice on who (mechanic/shop) to bring my 80 for some brake work. Fronts are shot (suprise!) Would this be a good time to put in the braided lines? I used to live in Apex and the folk at Apex Automotive did a good job with my wife's Subaru's brakes and tires for both. Now live in Durham and want to save a drive if possible.
Thanks for any and all your help
little_joe
SILVER Star
Welcome koncat!
Sounds like you just asked to host a HAMOM! Gather up the parts and set a date, and I'm sure some of us will be able to help.............
Sounds like you just asked to host a HAMOM! Gather up the parts and set a date, and I'm sure some of us will be able to help.............
Question On My New 60?
I Wanted To Know When You Guys Are Meeting Up Again? I Would Like To Drive The Old 60 To Get Some Insite On What I Need To Do This Rig? It Seams To Run Great Because I Drove It From Fl last week. The Guy I Bought If From Just Drove It To Fl From Ca Four Months Ago. Rust Free Clean Truck All The Way Around 128,000 Org Miles. I Think The Rear Main Is Leaking Just A Bit. I Need To Take It In To Have It Looked At. I Wanna Make Sure Everything Else Is Very Sound With No Leaks. Its Not My Everyday Driver (2001 4 Runner) But I Don't Want It Too Leak Any Fluids. Anyway... Would Like To Meet Up Some Time If You Guys Are Gonna Be Doing A Repair I'll Have My Buddys From High Point Bring Their Trucks As Well (80, 60). We Would Like To Help Or Even Host. We Like Beer And Grilling Too!
Ryan Barnard
High Point
1986 Fj 60 Lifted
I Wanted To Know When You Guys Are Meeting Up Again? I Would Like To Drive The Old 60 To Get Some Insite On What I Need To Do This Rig? It Seams To Run Great Because I Drove It From Fl last week. The Guy I Bought If From Just Drove It To Fl From Ca Four Months Ago. Rust Free Clean Truck All The Way Around 128,000 Org Miles. I Think The Rear Main Is Leaking Just A Bit. I Need To Take It In To Have It Looked At. I Wanna Make Sure Everything Else Is Very Sound With No Leaks. Its Not My Everyday Driver (2001 4 Runner) But I Don't Want It Too Leak Any Fluids. Anyway... Would Like To Meet Up Some Time If You Guys Are Gonna Be Doing A Repair I'll Have My Buddys From High Point Bring Their Trucks As Well (80, 60). We Would Like To Help Or Even Host. We Like Beer And Grilling Too!
Ryan Barnard
High Point
1986 Fj 60 Lifted
Last edited:
