Looking for a bottom waterhouse for my 87 60. I was replacing the thermostat and snapped one of the bolts. I have it drilled out witha bolt and nut holding it, but I'd like it stock again...
Official ONSC member buying/selling thread (2 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
M-100 Trailer noted above still available...
S4Cruiser
SILVER Star
WTB - Early FJ40 Door(s)
Looking for a set of straight, non rusty early hard doors for my '74 40. Passenger side a must, a pair would be a plus. The window frames of mine are good so if you only have the bottom sections that would work too.
PM or email me with what you got - jonbmabe [at] gmail [dot] com.
Thanks - Jon
Looking for a set of straight, non rusty early hard doors for my '74 40. Passenger side a must, a pair would be a plus. The window frames of mine are good so if you only have the bottom sections that would work too.
PM or email me with what you got - jonbmabe [at] gmail [dot] com.
Thanks - Jon
i figured when i got the truxus tires i would keep the nittos for long trips and such. Well, it's just a pain to swap them and they are sitting around. So, they go up for sale.
Sorry about the pictures, they are not the best and i hate they don't represent the condition these tires are in. I will try to replace these with better pics when i can.
FOR SALE: 4- nitto terra grappler 315-75 r16 -- asking $250 OBO for tires only. $700 for the 4 nittos and 5 OEM toyota 80 series wheels. One has a used 33 inch truxus on it. THey are spray painted black but can be easily cleaned back up to original.
Make me an offer, you might be surprised.
I accept paypal, but i will add on the paypal fee to the price. I will ship, but you will pay for shipping.
Sorry about the pictures, they are not the best and i hate they don't represent the condition these tires are in. I will try to replace these with better pics when i can.
FOR SALE: 4- nitto terra grappler 315-75 r16 -- asking $250 OBO for tires only. $700 for the 4 nittos and 5 OEM toyota 80 series wheels. One has a used 33 inch truxus on it. THey are spray painted black but can be easily cleaned back up to original.
Make me an offer, you might be surprised.
I accept paypal, but i will add on the paypal fee to the price. I will ship, but you will pay for shipping.
Looking for a 79 and newer body tub
Hi all,
I moved to the Raleigh area a little over a year ago and want to get started on my fj40 again. The 1981 tub is pretty much shot in the rear and floor and thought about rebuilding it but wanted to see if there were other options out there. I am looking for an aluminum or steel tub in good shape so that I can get this thing back road worthy again. I have most of all the other parts just mainly working on that. Also if anyone has a painless wiring harness that would be nice. And finally, wanted to see if anybody that owns a fj hangs out in the area. I have seen a few but not too many in the area (I am from MS). Anyways let me know. Willing to meet to get these parts.
-Patrick
Hi all,
I moved to the Raleigh area a little over a year ago and want to get started on my fj40 again. The 1981 tub is pretty much shot in the rear and floor and thought about rebuilding it but wanted to see if there were other options out there. I am looking for an aluminum or steel tub in good shape so that I can get this thing back road worthy again. I have most of all the other parts just mainly working on that. Also if anyone has a painless wiring harness that would be nice. And finally, wanted to see if anybody that owns a fj hangs out in the area. I have seen a few but not too many in the area (I am from MS). Anyways let me know. Willing to meet to get these parts.
-Patrick
- Joined
- Jan 16, 2003
- Threads
- 345
- Messages
- 3,649
- Location
- Charleston
- Website
- www.oldenorthstatecruisers.com
- Thread starter
- #626
Patrick, welcome to the board, if you would make a new post to introduce yourself. We have 61 members, who have vehicles ranging from FJ40's, FJ55's FZJ80's, FJ60 and 62's, quite a few FJC's and a few FJ45's, and 100 series. It's a great group and you will find a wealth of information among our local members here.
With that said, there are various options for the tub, fiberglass, aluminum, or you could go back to an original steel tub. Options range from $2,000-in excess of $4,000.
With that said, there are various options for the tub, fiberglass, aluminum, or you could go back to an original steel tub. Options range from $2,000-in excess of $4,000.
Last edited:
cmon greg....don't forget about the FJCs or a 55 stuck in there. Gotta represent!
Slee Rear Bumper For Sale
FOR SALE:
Used 80 series Slee rear bumper with tire carrier. I will include a Slee 2 inch receiver that bolts up to the four factory hitch holes. These are about $2000 new plus a couple hundred in shipping to get it here. I'm asking $1200. I don't really want to ship this thing so I'm hoping to sell locally. I'm located in Durham.
Mike
FOR SALE:
Used 80 series Slee rear bumper with tire carrier. I will include a Slee 2 inch receiver that bolts up to the four factory hitch holes. These are about $2000 new plus a couple hundred in shipping to get it here. I'm asking $1200. I don't really want to ship this thing so I'm hoping to sell locally. I'm located in Durham.
Mike
ARB Front Bumper
***SOLD***
FOR SALE:
Used 80 Series ARB front winch bumper. The bumper is is in good condition. There is a small dent + scratch on the driver's side wing. Its pretty minimal and does not affect the function of the bumper. Asking $450. As with the Slee rear bumper above, I don't really want to ship this thing so pick-up is preferable. I'm in Durham, NC.
Mike
***SOLD***
FOR SALE:
Used 80 Series ARB front winch bumper. The bumper is is in good condition. There is a small dent + scratch on the driver's side wing. Its pretty minimal and does not affect the function of the bumper. Asking $450. As with the Slee rear bumper above, I don't really want to ship this thing so pick-up is preferable. I'm in Durham, NC.
Mike
Last edited:
pm sent on the ARB front bumper.
Last edited:
S4Cruiser
SILVER Star
80 Series IPOR Rear Bumper
Thinking of selling my IPOR bumper (single swingout like the one on their site minus the locking pin). I've had it since Octoberish last year. It's been to Cullowhee once and URE twice. Still in great shape with a few chips on the underside of the powdercoat (that I touched up with Rustoleum).
Looking for $1000, no shipping but I am willing to drive a couple of hours to meet someone halfway if necessary.
PM me for more details if you are interested and I can send pics.
-Jon
Thinking of selling my IPOR bumper (single swingout like the one on their site minus the locking pin). I've had it since Octoberish last year. It's been to Cullowhee once and URE twice. Still in great shape with a few chips on the underside of the powdercoat (that I touched up with Rustoleum).
Looking for $1000, no shipping but I am willing to drive a couple of hours to meet someone halfway if necessary.
PM me for more details if you are interested and I can send pics.
-Jon
WTB:
ARB Front Bumper...want it cheap.
Aisin locking hubs....IFS or SFA, going with chromo hub gears.
ARB Front Bumper...want it cheap.
Aisin locking hubs....IFS or SFA, going with chromo hub gears.
fj40z is looking to sell his.
it might be spoken for though. I can't remember what he told me on saturday.
I halfway assumed that, so that's why I posted up. But you know how assumptions are.
Bill is going to get it. Thanks though.
See what I mean...that mean you're buying the one in Durham?
Yeah.......dont hate me.
It's straight. You're good at catching deals...I find them at the wrong times or not quick enough.
R
I have a partial 3-speed t-case from an FJ40 I need to get rid of. It is complete minus the nose cone assembly. Would be a great donor if you're looking to swap 3-speed gears into a 4-speed housing. I'll take $50 for it.
