Official ONSC member buying/selling thread (11 Viewers)

[krzyabncanuck]

Too much for both of the above.

Just me though.

 

[little_joe]

2 Tan cloth bucket seats w/ armrests

I have 2 tan cloth front bucket seats from a 2004ish Mazda5 mini-minivan. They have armrests, are in great shape, and have zooty tan leather 1995 FZJ80 headrests. The driver's side has an adjustable bottom cushion, lumbar; and both seatbacks recline. $100 or any reasonable offer and they're yours. Can provide photos.

These will not fit an 80 due to width of the seat base, but they'd be great in a 40, maybe a 60, etc.

 

[77cruiser]

this one is coming off in the next few weeks and I want give someone a good deal on it.
here are pics. the hinge is an iron pig and the bumper is a homebrew. the tire in the picture is a 315 but it could certainly hold larger. its a nice bumper. I will include Hella Light but I am keeping License frame and cb antenna.
I'd like to get $750
Thanks

I am really movitvated if your interested! Make an offer

 

[Flinny]

For Sale: OME Steering Stabilizer for fj80. Used for 1 year. $25.

 

[krzyabncanuck]

Anybody need a body from a fj60 ? Asking one last time here before i go into the rest of Mud to ask. Roofline is shot, but the rest is reallt good. Not asking alot here, just need it gone one day, or i am just going to cut it up , and take it across the scales. And here in a few weeks you can have it sitting on a bent frame.

 

[sdbrassfield]

Looking for a drivers side door and the lift gate...drop me a email line or call me at 919/920-3662. Located in goldsboro. What color interior?

 

[krzyabncanuck]

Replied to your PM.

 

[andystrwake]

This is my first post here in ih8mud! I am selling my 4runner because I bought an lx450. Lets face it, even though my 4runner is hooked up, I always had landcruiser envy. So the time has come to build up a Landcruiser.

here is the link to my craigslist posting. Thanks, and hello to all!

*** 99 4runner limited ARB WINCH LIFT MUCH MORE! SUPER CLEAN ****

 

[motoman426]

air cleaner assembly for a 84 FJ60 $50 plus shipping
Carb fan $20 plus shipping
Distributer with coil and ignitor $150.00 plus shipping This came off a running fj60 I went to a non us dizzy
Hood $50 plus shipping it is not the greatest but it will open and shut so perfect for a beater hood I can deliver most of these parts if need be
I also have some smog junk that is laying around if someone needs some parts

 

[BLUE73FJ40]

Wind shield channel

Does anybody have a windshiled channel for a 72 FJ40 soft top? I had OCD TOPS make me a soft top and need to get a channel for the soft top.

 

[southerncruiser62]

Blue73FJ40, you should be able to go to any upholstery shop and purchase the amount of c channel you need.

 

[krzyabncanuck]

Looking for an old Yota truck. 4x4 preferably.

Wife approves of this buy.

 

[jfz80]

Looking for an old Yota truck. 4x4 preferably.

Wife approves of this buy.

See previous post

 

[lt1fire]

Wish I had the cash or anything to offer

I hate to do it but, THIS LIL PIGGY NEEDS A HOME.
However, since buyers arent lining up for toys it may likely get to stay in the pen. Really dont want to, especially with not getting to wheel it in its current form. More of a knee surgery kicked my financial ass kinda deal.

The "good"

1972 FJ 55
1976 front disc axle
1977 2F rebuilt w/ 0 miles, 3fe headers, new water pump, oil galley plug, new rings, bearings, and gaskets
4spd transmission and 3spd tcase
NEW clutch, TO bearing, etc Machined flywheel at same time
SOA setup with 3'' body lift; yeah its a big pig
36 x 13.6 Iroks on tundra wheels
Saginaw/Scout power steering (pump needs reseal)
IPOR sliders welded to the body
IPOR rear bumper w/ swingout
IPOR front bumper
Welded rear diff
ALL new Front leaf spring bushings, 0 miles
working rear power window
Chattanooga cruisers conversion van power seats
All new fluids with less than 1000 miles, including full brake flush
Cold Air intake

The bad:
door hinges and latches need reworking
rear driver window fell off track
PS pump needs to be resealed
needs and exhaust, you can have the old one but will need rerouting
brakes need bled one more time after sitting
only one straight body panel on the whole truck
um............ some rust

I dont want to sell but am in the need for some $ or a good +30mpg DD

If it doesnt sell, plans were to ditch the body lift, reseal the PS pump, fab a tcase support, add a front half cage and wheel the piss out of it. One day upping to some 80 axles or the like, ditching the back half, etc etc........Sounds fun no?

btw cam (ipor) has a built set of axles perfect for this pig !!!!


$ 4000 or a TDI/civic

Definately a wheeling rig and hard to put a price on but I keep finding 85 yotas in this range, and well lets face it, the piggy is waaaaaaaaaaaaay cooler

Tell me what you got, no offense taken here.

If there was enough interest i would entertain parting.
would like to have at least two categories spoken for to begin

$1500 OBO for F/R IPOR bumpers and Sliders
$1500 77 2F w/ 76 4spd transmission, and 72 tcase
$1500 FJ 55 rolling SOA chasis and shell

 

[krzyabncanuck]

See previous post

Too bad i already have one.

 

[southerncruiser62]

Guys I have a Ramsey 9000 LB winch for sale, has cable and controls.

$300

SOLD

 

[jfz80]

Guys I have a Ramsey 9000 LB winch for sale, has cable and controls.

$300

would go great on a pig ! ok ok

but seriously I got a buddy looking to get 10K for his work truck:

2000 chevy 2500 HD GAS 5-spd w/ 10' dump bed w/ stake sides
bought new by him for his landscape business, now has 70k miles
I can get you in touch with him if your interested

 

[jfz80]

Too bad my wife already has one and I dont.

their kinda like lays ya know, you cant just have one


and so im not completely chatty kathy

56cm Raleigh road bike, new condition (fits an average 5'9' rider)
Reynolds 531 steel tubing, lug construction
Shimano 105 equipment and STI shifter
Clipless pedals and shoes if they fit
Cinelli carbon front fork
Continental tires (tubed)

$500 obo bring on the offers

 

[addicted56]

Wish I had the cash or anything to offer

you've got a parts rig taking up some space in your garage .

Also rexman is looking for your stock axles to put under his portal setup. I shot your name to him. Apperently nobody wants an 80 with portals. Sure those portals are going to be sold seperatly.

 

[sdbrassfield]

Anybody need a body from a fj60 ? Asking one last time here before i go into the rest of Mud to ask. Roofline is shot, but the rest is reallt good. Not asking alot here, just need it gone one day, or i am just going to cut it up , and take it across the scales. And here in a few weeks you can have it sitting on a bent frame.

D,

Thanks for the parts and pieces...Nice rigs too...