For Sale New York City Area: H1FA Tcase; Manual Hubs, 4H Buttons; AF442 Trans & Cooler; Drive Shafts

[Jorgei]

Hello mudders,

I have the following items for sale:

> H1FA part-time tcase - this came with my H151 trans and was said to be in perfect working order. I purchased this from a fellow mudder
>>SOLD

> New Asin manual hubs (one has a little corrosion on the bolts as they sat for a while)
>>SOLD

> Two 4H buttons with harness and pigtails
>>SOLD

> AF442 Trans with ~190K miles. Absolutely nothing wrong with it, was working fine before removal. It comes with the torque converter, flex plate, dip stick, bellhousing bolts, and shift lever. Please note: I had to cut the harness for the neutral safety switch and the top of the cooler lines.
>>$650

> AF442 Trans oil cooler
>>$100

> Front and rear drive shafts for AF442 and 1FZ-FE engine with ~190K. Nothing wrong with them, just don't need them anymore.
>>$100/each

I can ship any and all items...I have a pallet...but it will be kind of steep. I'm in the NYC area and am willing to meet at a reasonable distance. I will be moving to Florida in about a month and can arrange to meet on the way south.

Thank you for looking. Please PM me.

Pics:

 

[Bisonthecruiser]

Do you have the temp switch/sensor for the transmission?

 

[girraffe]

Sent PM on the case

 

[Jorgei]

Do you have the temp switch/sensor for the transmission?

I have not removed anything off the trans, so it's in there...not sure which on it is.

 

[Jorgei]

Sent PM on the case

PM-ed you back

 

[cruisermatt]

What are the length measurements on the driveshafts? And where in Florida?

 

[Jorgei]

Not sure honestly. These are OEM drive shafts that came on the USDM '94 trucks. I will be in South Florida in about a month, so driving down I-75 and through Orlando.

 

[Bisonthecruiser]

I have not removed anything off the trans, so it's in there...not sure which on it is.

I'd take this if you can pull it!

 

[Jorgei]

I'd take this if you can pull it!

Sure...which one is exactly? Let me know via PM so we can work out the details. Thanks!

 

[cruisermatt]

Not sure honestly. These are OEM drive shafts that came on the USDM '94 trucks. I will be in South Florida in about a month, so driving down I-75 and through Orlando.

I mean, can you measure them? There's no good measurements in the 80 section.

 

[Jorgei]

I mean, can you measure them? There's no good measurements in the 80 section.

Got it...I'll take measurements and post them

 

[Jorgei]

If anyone needs a good condition A442F trans...I'm driving from NYC to FL in two weeks or so. Now is your time to avoid expensive shipping costs.