NEED REAL TIME HELP....Rig won't start.. (1 Viewer)

[Silicon 70]

Nevermind,,, problem solved

I was changing my PHH today and after putting everything back together now the rig won't start. All the guage lights come on and the security code on the radio says everything is a go.

When I turn the key to the "ON" position(not starting it) I hear two clicks coming from the engine compartment, but doesn't start when I try to.

I suspect the starter. Maybe I didn't tighten the bolt enough? I'm going to double check it right now, but could it be some thing else?

 

[landtank]

is it not starting but turning over or not turning over?

 

[Gumby]

You took the starter out?

Might be a loose starter connection.

Might be a dead battery

 

[cruiser88]

if you took the starter out did you unhook the battery .what im getting at if you did not you may have shorted something out start checking all of your fuses

 

[Silicon 70]

I figured it out. Its so stupid I don't even want to mention it.

 

[cruiser88]

oh come on tell us we have all done stupit things

 

[CJF]

I figured it out. Its so stupid I don't even want to mention it.

Not fair Silicon.

Folks took the time to try and help you out. You owe it to all of us to 'fess up. Heck, it'll probably even help out someone in the same situation down the road.

Curtis

 

[Silicon 70]

Okay Okay....No need to twist my arm. I thought I put the main starter bolt back on and when I went to go check. It was just hanging on the side.

Now I have another problem, but I'll post a new thread for it. I promise my next post won't be that easy of a problem.