I'm about to pull the trigger on all the stuff I've acquired for my lift after lots of reading and looking, i've been out of IFS stuff a long time and want to do things once and right. If only these 100 series had a Solid front they would be about perfect .
My track has Ironman4x4 bumper, superwinch 10k winch and sliders. No plans to go full overland and this is my DD but will proably get method or raceline 17"s and some 295/70r17 Mickey T At's or some 33" variant
So far what i've ordered
- Dobinson UCA ( know way to many people with SPC upper issues and I like the 555 balljoint replacement )
- Sway-away Torsion bars
- Slee diff drop
- Trail tailor Sway bar links
- Eimkeith WIY panhard drop
- Slee Brake lines
- Bili 5160's (I got for a steal and what prompted just ordering random things not a full kit)
- OME Springs for very light load.
- Durobump front bumpstops
- 3d Printed rear bumpstop (wanted to try these)
Am I missing anything? Don'y plan to wheel it to hard as I will get another SAS'd rig for that
My track has Ironman4x4 bumper, superwinch 10k winch and sliders. No plans to go full overland and this is my DD but will proably get method or raceline 17"s and some 295/70r17 Mickey T At's or some 33" variant
So far what i've ordered
- Dobinson UCA ( know way to many people with SPC upper issues and I like the 555 balljoint replacement )
- Sway-away Torsion bars
- Slee diff drop
- Trail tailor Sway bar links
- Eimkeith WIY panhard drop
- Slee Brake lines
- Bili 5160's (I got for a steal and what prompted just ordering random things not a full kit)
- OME Springs for very light load.
- Durobump front bumpstops
- 3d Printed rear bumpstop (wanted to try these)
Am I missing anything? Don'y plan to wheel it to hard as I will get another SAS'd rig for that
Last edited: