- Location
- United States
Large section of floor. Will not ship. Going to scrap soon.
00.
00.
Last edited:
SOLD MS Gulf Coast: large floor panel section
- Thread starter GJCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
Bump.
Your pick is a little confusing. Is this the whole back floor panel seats to tailgate?
looks like just behind front seat to tailgate.
I may be interested if I can find a way to get it (all) here, and I confirm that it duplicates the floor in my 74.
I may be interested if I can find a way to get it (all) here, and I confirm that it duplicates the floor in my 74.
Last edited:
- Thread starter
- #6
From the large step under the rear seat where the transistion goes from vertical to horizontal, 44" to the rear, 27" forward. Panel is 38" wide, or about 1" inside each wheelwell.
If you cut that up for gonzopancho, I would be interested in the back portion that goes nearest the tailgate. Mind is rotted out and gas tank is exposed.
- Thread starter
- #9
As you are all contemptating this, please know I have no problem assisting with shipping. However, Fastenal has told me (under no uncertain terms) due to the sheet metal hazard, any panels shipped MUST fit completely inside the dimensions of the pallet they are strapped to. A standard pallet is 40 by 48 inches. Thy have advised, a larger custom pallet (within reason, their term) would be acceptable subject to their inspection. IOW, they are not real agreeable.
I know of no other method.
I know of no other method.
Would you be willing to cut that panel in thirds at the seems? Those sections may fit on a standard pallet.
If not, I have had our local Fedex Office Print and Ship store do some packing and shipping of crazy sized stuff. If you are up for that, I can give you my Fedex number or they can call me when the panels are packed up. Will send the $$ for the panel up front, just tell me how and when.
If not, I have had our local Fedex Office Print and Ship store do some packing and shipping of crazy sized stuff. If you are up for that, I can give you my Fedex number or they can call me when the panels are packed up. Will send the $$ for the panel up front, just tell me how and when.
Would you be willing to cut that panel in thirds at the seems? Those sections may fit on a standard pallet.
If not, I have had our local Fedex Office Print and Ship store do some packing and shipping of crazy sized stuff. If you are up for that, I can give you my Fedex number or they can call me when the panels are packed up. Will send the $$ for the panel up front, just tell me how and when.
Or is it even still available?
- Thread starter
- #13
The floor is stil here. I never heard back from Gonzopancho.
@Honger Let us know when your ready to pull the trigger. We are ready and willing.
@Honger Is the floor panel still available. If so let us know and we will send payment and discuss shipping process
- Thread starter
- #17
Floor piece is still here. Hurricane took out ISP (among other things) for awhile.
Ok. Was wondering if you made it through the storm
Are you up to cut that in thirds? FedEx will pack and deliver.