"Mini" Hamom in Havelock...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

list....

I came up with a list of everything that needs to be done. It's in no particular order. Some of it is simple and some more complex:

Hook up gauge cluster
Install exhaust/intake manifold
clutch master cylinder, brake line and new slave cylinder
brake master cylinder
new brake line on front axle
bleed brakes and clutch system
install weatherstriping under windshield
install tranny hump
change fluids in front diff, tranny, tcase and engine.
change coolant in radiator
install dash pad and lower pad and new windshield knobs
tune up plugs, points, cap, wires
adjust carb
install carb blower
reinstall heater
air cleaner assembly
cig lighter
mirrors

and a safety check

Im sure there is more but that is my list. The only tool I might need to borrow is a torque wrench and maybe a tap and die set.

Thank you:cheers:
i
 
custyota said:
I came up with a list of everything that needs to be done. It's in no particular order. Some of it is simple and some more complex:

Hook up gauge cluster
Install exhaust/intake manifold
clutch master cylinder, brake line and new slave cylinder
brake master cylinder
new brake line on front axle
bleed brakes and clutch system
install weatherstriping under windshield
install tranny hump
change fluids in front diff, tranny, tcase and engine.
change coolant in radiator
install dash pad and lower pad and new windshield knobs
tune up plugs, points, cap, wires
adjust carb
install carb blower
reinstall heater
air cleaner assembly
cig lighter
mirrors

and a safety check

Im sure there is more but that is my list. The only tool I might need to borrow is a torque wrench and maybe a tap and die set.

Thank you:cheers:
i
Click to expand...

I've got a torque wrench, but I'm sure others do as well. At first, that looks like a long list, but we should be able to get everything done in a day.
 
I may drive down to help wrench and pick up the 12. I will know more by the weekend.
 
The more the better!

I just need to know by next wed who's comming for food and beer purposes. And if any one needs a place to crash.

Order a few more parts and pieces hopefully they show up in time.
 
Hey Johnny, any chance I can meet you guys in raleigh and tag along???
 
96Cruiser13 said:
Hey Johnny, any chance I can meet you guys in raleigh and tag along???
Click to expand...

I'm riding up with Mike, but I believe he told me that there's extra room in his truck, so I don't see why you wouldn't be able to come along!

What say you Mike?
 
I may not be of much help. I may drink the whole time. I work on cars 60+ hrs a week... Drinking is more fun...:hillbilly::hillbilly:
 
I'm not going to be able to make it. Got a rear axle to build for a customer that day. Building the front this weekend. Then got Uwharrie the following weekend. Man, i quit the PO for a break. Working more and harder now.
 
krzyabncanuck said:
I'm not going to be able to make it. Got a rear axle to build for a customer that day. Building the front this weekend. Then got Uwharrie the following weekend. Man, i quit the PO for a break. Working more and harder now.
Click to expand...

That's good man, that means that opening up shop was the right move!


What do you think mike, we staying for an overnight? Ill bring the snuggie :D
 
Well the good news is my gasket came in today.

Darin im glad you are busy! That's great!

So you turds staying the night?
 
I'm down to stay the night! I may have withdrawals from my pup...
 
So that confirms it. Mike, Ryan and I are going to spend the night. Bars after we fix up your 40?
 
You must log in or register to reply here.

Share this page

Back
Top Bottom