Anyone know what the main bearing and rod bearing clearance on a 77 2F should be, I left my book at work and am out of luck till Monday and naturally I'm putting it back together tonight. Thanks
Main Bearing Clearance
- Thread starter thewatergoblin
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
2f manual specs
I have the toyota 2 f manual pub no 98126
page 3-35
it does not seem to mention year so I imagine all 2fs have the same
measure crankpin
lay strip of plastigage across pin
torque to 35-55 ft lbs (do not turn rod)
measure plastigage at its widest point
0.02-0.06 mm or 0.0008-0.0024
Same procedure as above
measure main journal oil clearance
torque- no 1-3= 90-108 ft lbs
no 4= 76-94 ft lbs
clearance = .020 - .044 mm or 0.0008-0.0017
I have the toyota 2 f manual pub no 98126
page 3-35
it does not seem to mention year so I imagine all 2fs have the same
measure crankpin
lay strip of plastigage across pin
torque to 35-55 ft lbs (do not turn rod)
measure plastigage at its widest point
0.02-0.06 mm or 0.0008-0.0024
Same procedure as above
measure main journal oil clearance
torque- no 1-3= 90-108 ft lbs
no 4= 76-94 ft lbs
clearance = .020 - .044 mm or 0.0008-0.0017
- Thread starter
- #3
Thank you,Thank you, Thank you. I appreciate it.
no prob
no prob--I shouldnt be so lazy at night and should be out finishing mine---but instead I am bench wrenching and gawking at everyone elses nice FJs
no prob--I shouldnt be so lazy at night and should be out finishing mine---but instead I am bench wrenching and gawking at everyone elses nice FJs
