MAF S/R + ARB front bumper????

[peepers]

Hi,

I am pretty sure the Man a Fre shackle reversal uses the same mounting holes that are currently occupied by my ARB front bumper.

Can the install of the S/R be done and still keep the bumper? Has anyone done it? Pics?

 

[Tapage]

Yes you can .. let me found pics from a friend HJ-60 with this setup.

 

[peepers]

Yes you can .. let me found pics from a friend HJ-60 with this setup.

many thanks... the SR is just sitting in my basement - i would like to get it installed.

 

[Tinker]

Isn't the SR bracket welded on?

 

[euclid]

Bolt on to get it all set up, then weld it. Don't drive it on just the bolts, supposed to be welded.

Isn't the SR bracket welded on?

 

[peepers]

Bolt on to get it all set up, then weld it. Don't drive it on just the bolts, supposed to be welded.

right. and those bolt holes are the same ones that the ARB is using.
i hope something works out.

 

[Tapage]

right. and those bolt holes are the same ones that the ARB is using.
i hope something works out.

yea but is no mayor problem .. so you put first your SR weld well, and take care for the space under the chasis.

After that reinstal your ARB bumper

 

[peepers]

yea but is no mayor problem .. so you put first your SR weld well, and take care for the space under the chasis.

After that reinstal your ARB bumper

could you find the pics?

 

[AuburnFJsexy]

Yes, you can put the S/R on and still keep your ARB bumper, it is what i have on my 60. Ill see if i can find any pictures i might have on it. I believe i might have edited the ARB mount a lil. Did you get the U-bolt flip kit with it ?

Nick

 

[peepers]

Yes, you can put the S/R on and still keep your ARB bumper, it is what i have on my 60. Ill see if i can find any pictures i might have on it. I believe i might have edited the ARB mount a lil. Did you get the U-bolt flip kit with it ?

Nick

no u bolt flip kit. thanks, please find the pics or describe the level of effort to mod the bumper.

do you wheel the truck? how is the drive shaft length? did you get longer shackles in the rear?

 

[Tapage]

no u bolt flip kit. thanks, please find the pics or describe the level of effort to mod the bumper.

Not much .. effort, sorry I can't find those pics ..

do you wheel the truck? how is the drive shaft length? did you get longer shackles in the rear?

You must need the longer shackles rear to compensate the new lift in front with the shackle reversal kit ..

In my case the SR put 1.5 - 2" lift .. and I use 6" shackles rear to compensate the new lift ..