LX470 New OEM Torsion Bar Install (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

kuelblaz

SILVER Star
Joined
Jan 21, 2018
Threads
5
Messages
37
Location
Burleson, TX
Two question ...
1. Got a new pair of torsion bars which the factory kindly marked for me. I marked the bars and arms when I removed them all from the truck, but when I cleaned the parts I also cleaned the martks off ... @!#$$ !! The FSM makes no reference to aligning the factory match marks to the missing teeth in the arms or tooth offset. The bars are in the right rotation according to the marks on the back ...
Does anyone know of the factory setup has a tooth offset or are the bars installed straight through?

2. I have searched for the orientation of the pivot anchor but no luck. The anchor bolt hole is offset, but I cant figure out if the short end goes fore or aft. The FSM makes no reference to the orientation, just to put it in. Anyone know which way it goes in?

i'll try to get some pics uploaded . . .

Any info is appreciated . . .
K.
 
Copy ... I a big fan of anti-seize. Appreciate the tip!
 

Users who are viewing this thread

Back
Top Bottom