Done, thank you!
LV door hinge seals are coming back
- Thread starter arthog
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Address sent to-----PM'd. Thanks again.
- Thread starter
- #24
Wow! Everyone who said they wanted a set or more has come through and payed up, I'm amazed and grateful. Thanks. There are a few from Facebook I'm still waiting on. I'll give it till later in the coming week and then start the production process. I will keep everyone up-dated
mmcinnis
Supporting Vendor
i'm in for a set if avail.
ty
Mike
ty
Mike
I don't want to step on any toes here.....but I have a set of these seals that I bought and never used. They are brand new in the envelope they were sent to me in. I'll let them go. Pm me if you're interested.
Again....not trying to cause any issues.
Again....not trying to cause any issues.
- Thread starter
- #27
This new set of seals are new and improved with better fit and easier to install.
Cant wait to receive these.....super excited. Is there a ETA..................??
- Thread starter
- #31
I’ll probably end up shipping on Thursday. Pick 45 you’re in Sacramento so I’m guessing first part of next week I’ll send tracking numbers to everyone once I get everything squared away. Also, my Internet on my computer is out and I don’t generally do mud or Facebook from my phone so bear with me it’s a little slower for me to do it that way, especially getting tracking numbers and all that sent back to people via my phone. Thanks for understanding.
- Thread starter
- #32
hey everybody. All orders have been shipped. I’ve notified everybody that I can with tracking numbers and you should be receiving your orders shortly anybody who’s on Facebook? I am locked out of my account because I don’t have Internet connection through my computer so if anybody is on Facebook in the 45 group you might if you would put up a little post saying everything been shipped but until I get access to my account again, I can’t send tracking numbers to those people on Facebook. Other than that, we finished with this project thanks to everyone who helped out with it.
- Thread starter
- #33
Now that your seals will be arriving soon. The next thing is installing them. Some hints I have are as follows. The early model that I did in the early 2000s, were direct copies of what I pulled off 45 LV’s and RVs that I found in junkyards and ones I just came across those were rather tight to install and the best way was to remove the door and the hinge slide them on and reinstall your door. Yes, a major pain in the ass. I redesigned it a little bit with these new ones and if your doors are already installed you can slit one side of the seal place it on your hinge and door mark with a pencil add your glue and to both sides I presume and install it that way. Thoughts I’ve had on this are gluing it to the door, but not the hinge so if you need to remove your door, your hinge wouldn’t be glued to the seal. They fit tight enough where I think that would be a fine way to do it and that’s how I would install them if I had a 45 wagon anymore. If you restoring and you have doors and hinges all separate, I would do the same marking for location to put the glue and I would slide the seals onto the hinge and slide it into place when you were ready to install it. if you have any questions, please reach out to me and we can talk about any issues you may have. Thanks again everybody for participating in this good luck. Have a good day.
Seals were received and are an incredible reproduction. Very high quality. And thank you for the tips on install. My doors are off with hinges attached to door. The glue trick may prove to be the ticket. Thank you again for doing these. Cheers....
