For Sale Landcruiser Fire truck rear PTO with lever

[65swb45]

Location

United States

fits 64-75 with stock 3speed transmission. Definitely JDM. $500 shipped. Call the shop or post up with questions or comments. No PMs please.

 

[Living in the Past]

Very cool Mark. Wish I had the four speed with the ten spline output shaft. My 70 FJ40 has a three speed, but that is the only one that hasn't been upgraded or planned to be upgraded.

 

[65swb45]

And yes, that is not a typo; I have pulled 3 speeds out of '75s and even '76s with the 4 speed case.

 

[a77fj40]

that red knob is COOL!. do you know what this was used for? did they have winches on the back of fire trucks?

 

[Living in the Past]

And yes, that is not a typo; I have pulled 3 speeds out of '75s and even '76s with the 4 speed case.

I know some markets had three speeds thru the 80 model and rumor even made to fit split case in poverty equipped cruisers. Partly because of the easy way they could be rebuilt anywhere.

that red knob is COOL!. do you know what this was used for? did they have winches on the back of fire trucks?

I'll let Mark answer but believe red is a give away.

 

[Indygbd]

Mark, how exactly does this mount? Do you have any other pictures of the gearbox part? I might be interested in this. I have wanted to rig a cruiser up with a rear pto output to run a generator.

 

[65swb45]

IIRC (lecture from Marv decades ago) it ran a thru pump, stream to fire hose.

 

[65swb45]

Mark, how exactly does this mount? Do you have any other pictures of the gearbox part? I might be interested in this. I have wanted to rig a cruiser up with a rear pto output to run a generator.

Pull off the six bolt cone that covers the tailshaft, remove the collar that covers the tailshaft splines, disassemble the PTO and reassemble onto the tailshaft.

 

[Indygbd]

Pull off the six bolt cone that covers the tailshaft, remove the collar that covers the tailshaft splines, disassemble the PTO and reassemble onto the tailshaft.

I see. If you can hook me up i'm interested.

I will probably never use it, but I think it is cool.

 

[DasBeast]

that red knob is COOL!. do you know what this was used for? did they have winches on the back of fire trucks?

Pic of the red knob is upside down but I think it says "Morita" (ﾓﾘﾀ) in the middle.
On the Top "引く．．．ポンプ回転” Pull . . . Pump Rotation

 

[65swb45]

Pic of the red knob is upside down but I think it says "Morita" (ﾓﾘﾀ) in the middle.
On the Top "引く．．．ポンプ回転” Pull . . . Pump Rotation

Thank you. I meant to ask if anyone could provide a translation of the writing.

 

[65swb45]

November bump.

 

[Indygbd]

I keep looking at this. How about $400.00 shipped?

 

[65swb45]

Make it $425 and you've got a deal.

 

[Indygbd]

Make it $425 and you've got a deal.

Lets do it!

Gabe Douglas
6476 E 800 N
Syracuse, IN. 46567
260-804-6182

Can I PayPal you as a friend? If so, what is the address and I will get it right over to you?

 

[65swb45]

Yes.

PP friends &family to my MUD username at earthlink.net.

 

[Indygbd]

Money Sent.
Thanks Again. When I figure out what to do with it, I will send you some photos.

 

[65swb45]

I can put those rear door pins in the same box if you still want to buy me out.

 

[Indygbd]

I can put those rear door pins in the same box if you still want to buy me out.

Thanks, however I found some used ones in great shape. I am still hunting for a rear oem FJ25 bench seat and a few other early parts if you have any new or used early stuff laying around.