Lack of availability on front bumpers (1 Viewer)

[Alex1118]

I’m close to purchasing a 2015 and have begun a high level build to pitch to the ‘boss.’ I’m having trouble finding any type of front bumpers in stock. I’ve looked at the Ironman one and ARB deluxe bumper. Any advice from anyone?

This is what I’m looking for.

Premium Off Road Bumper | Toyota Land Cruiser 200 Series (2012-2015)

The new Ironman 4x4 Premium Deluxe Bull Bar has been designed with the ultimate in vehicle and passenger protection in mind. Upgraded with heavy duty 60.3mm diameter upper loop tube, these bull bars look tough, perform tough and are tough. SRS airbag tested and certified, they are winch...

www.ironman4x4.com

 

[Cuse Cruiser]

In stock:

SLEE- Steel Front Bumper - '08-'21 Land Cruiser - Slee Off Road

Features Mounting brackets and winch frame made from 3/8” and 1/4” steel Mounting brackets attach to vehicle frame with 8 bolts per frame rail – 16 bolts in total Upswept wings for optimum approach angle Recovery points integrated into mounting brackets – pulling loads are in line with frame for...

sleeoffroad.com

SLEE - Aluminum Hybrid Front Bumper - 08+ Land Cruiser - Slee Off Road

Features Outer shell, light pockets and stinger fabricated from Aluminium. Mounting brackets and winch frame made from 3/8” and 1/4” steel Mounting brackets attach to vehicle frame with 8 bolts per frame rail – 16 bolts in total Upswept wings for optimum approach angle Recovery points integrated...

sleeoffroad.com

ARB SAHARA Winch bar - 12-15 Cruiser No Chrome Hoop - Slee Off Road

Features: Compatible with Headlight Washer System Air Bag Approved Recessed Indicators Recessed Fog Lamps – Optional Powder coat Gray Retains Factory Tow Points Light Mounts Antenna Mount

sleeoffroad.com

 

[Alex1118]

In stock:

SLEE- Steel Front Bumper - '08-'21 Land Cruiser - Slee Off Road

Features Mounting brackets and winch frame made from 3/8” and 1/4” steel Mounting brackets attach to vehicle frame with 8 bolts per frame rail – 16 bolts in total Upswept wings for optimum approach angle Recovery points integrated into mounting brackets – pulling loads are in line with frame for...

sleeoffroad.com

SLEE - Aluminum Hybrid Front Bumper - 08+ Land Cruiser - Slee Off Road

Features Outer shell, light pockets and stinger fabricated from Aluminium. Mounting brackets and winch frame made from 3/8” and 1/4” steel Mounting brackets attach to vehicle frame with 8 bolts per frame rail – 16 bolts in total Upswept wings for optimum approach angle Recovery points integrated...

sleeoffroad.com

ARB SAHARA Winch bar - 12-15 Cruiser No Chrome Hoop - Slee Off Road

Features: Compatible with Headlight Washer System Air Bag Approved Recessed Indicators Recessed Fog Lamps – Optional Powder coat Gray Retains Factory Tow Points Light Mounts Antenna Mount

sleeoffroad.com

Forgot to mention, I want one that protects the headlights as well.

 

[CT3]

I have 2015 with the the full ARB bumper:

Unless you’re in an area where animal strikes are a real reality, then then lighter, typically aluminum-based designs from some of the top US manufacturers might make more sense. I love the traditional look of ARB, but if I were doing it again I would seriously consider Dissent or Slee.

Good luck!

 

[grinchy]

Aside from the arb and Ironmans of the world, it’s not uncommon for the bumpers to be built to order, with a 12 week or more timeline. For a while between 2018 and 2020, there was exactly one vendor selling sliders (budbuilt), with sometimes a 6 month wait time.

The 200s did not sell in the same volumes as Tacoma 4Runner or F150s.

 

[gasman4u]

Have you seen the TJM t13 in stock anywhere? I can't even find a seller, let alone in stock.

It'd do a heck of a job protecting against deer/animal strikes imo.

 

[Cuse Cruiser]

TJM no longer has US based warehousing, ship from AUS, will not be affordable to get it shipped.

 

[gray rider]

I’m close to purchasing a 2015 and have begun a high level build to pitch to the ‘boss.’ I’m having trouble finding any type of front bumpers in stock. I’ve looked at the Ironman one and ARB deluxe bumper. Any advice from anyone?

This is what I’m looking for.

Premium Off Road Bumper | Toyota Land Cruiser 200 Series (2012-2015)

The new Ironman 4x4 Premium Deluxe Bull Bar has been designed with the ultimate in vehicle and passenger protection in mind. Upgraded with heavy duty 60.3mm diameter upper loop tube, these bull bars look tough, perform tough and are tough. SRS airbag tested and certified, they are winch...

www.ironman4x4.com

I have one that I could potentially "part out" to you but Im trying to figure out a complex sideways/downward /upward move. Yes, that!

 

[ryanCA]

I have one that I could potentially "part out" to you but Im trying to figure out a complex sideways/downward /upward move. Yes, that!

View attachment 3863396

damn i would take it if you werent so far away!!

 

[gray rider]

I said POTENTIALLY. you have no idea how complicated the web is on my end.....all good tho. Good luck to ya.

 

[gray rider]

damn i would take it if you werent so far away!!

I thought that you said that you have relatives in NC??

 

[gray rider]

And that is a sad sack photo of a comatose LC......but the Phoenix will rise.

 

[BigSwede]

LX Front Bumper | Strike | Lexus LX 570 (12-21) - Victory 4x4

Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.

www.victory4x4.com

 

[gray rider]

Yeah it is the sudden stop. And you are fired before you hit the ground....

 

[ryanCA]

I thought that you said that you have relatives in NC??

inlaws in raleigh

lc is 3200 miles away

 

[gray rider]

im 3 hrs from raleigh
Half way is 90 minutes

 

[gray rider]

we will c