KDSS front sway bar

[Gx4sevend]

So a shop f'ed up the bolts that connect at the ends of the lower control arms and since they're connected to the lower control arms, fixing it is t the easiest thing. I need to have the bolts cut off the control arms and the the hole tapped for a larger bolt.

So, that being said, would it mess up the kdss system if I just removed the front sway bar and replaced it with the total chaos lower control arms? That's what I wanted to do in the first place but now I have a reason to.

 

[GXO]

TC lowers are not KDSS compatible.

 

[Gx4sevend]

If the sway bar is off they are the same correct?

 

[GXO]

yep

 

[Gx4sevend]

I just want to make sure I can remove the front sway bar without the kdss freaking out.

 

[GXO]

Once you replace the arms and "go big" the KDSS becomes irrelevant and a limiting factor. Call MetalTech and ask to Mark, he can give you his perspective.

 

[madtoy]

You can also just drill out the holes on the brackets, and use a nut and bolt on the back side.

 

[Gx4sevend]

Who has the best pricing on the total chaos lowers in case I go that route?