KAMDESIGNSTUDIOS 1stGen Offerings (1 Viewer)

[JCX03]

Hello!

My name is Joseph, and in my free time, I design products for the 1stgen platform. Since 2019, I've envied that other vehicles have so much aftermarket support, and so, I decided to make my own parts. I've also offered these parts to other members on FB groups, but figured a post here would be good to have as I sold a few now.

Compatibility / Quick Notes
- Everything is designed around the 2005 Sequoia that I own.
- Parts are compatible with 2001-2007 Sequoia & with 2000-2006 Tundra, as long as it's the same part that we're working with.
- These parts are BRACKETS/MOUNTS only. Additional accessories NOT included (i.e. switch system itself, or RAM BALLS, or hardware to mount accessories).

All of these parts are MADE IN USA in SoCal. I do not run a fab shop of any sort, so I work with local small businesses to help me put everything together.

Thank you for checking the works out! You can view full exhaustive small detailed information on my website.
https://kamdesignstudios.com/

Quick List of Things offered & a few photos.
Please check out the website, for full information.
All prices include UPS shipping with Insurance CONUS.

1. Overhead Switch Mount V2 $93
KAM DESIGN STUDIOS - Overhead Switch Mount V2 - https://www.kamdesignstudios.com/overhead-switch-mount-v2
- Industrial 3D printed via MJF in Nylon12
- Compatible with 8 Gang Switch Panel

2. Underseat Storage Panel V1 $70
KAM DESIGN STUDIOS - Underseat Storage Panel V1 - https://www.kamdesignstudios.com/underseat-storage-panel-v1
- 5052 1/8" aluminum & powder coated in black semi gloss with texture
- Longer JIS Grade 10.9 bolts included!
- This is for 1 seat.

3. Dash Mount V2 $140
KAM DESIGN STUDIOS - Dash Mount V2 - https://www.kamdesignstudios.com/dash-mount-v2
- Drilling into dash required
- industrial 3D printed spacer via MJF in Nylon12
- 5052 1/8 aluminum & powder coated in black semi gloss with texture.

4. Electrical Mount v1.5 $90
KAM DESIGN STUDIOS - Electrical Mount V1.5 - https://www.kamdesignstudios.com/electrical-mount-v1-5
- 5052 1/8 aluminum & powder coated in black semi gloss with texture
- mounts above your OEM fuse panel in engine bay
- recommended to use the 8gang switch system

5. Compressor Mount v2 $150
KAM DESIGN STUDIOS - Compressor Mount V2 - https://www.kamdesignstudios.com/compressor-mount-v2
- Drilling into engine bay passenger wall required
- 5052 1/8 aluminum & powder coated in black semi gloss with texture
- mounts above your PS res in engine bay.

 

[JLo with Tandem]

Looking good man! Nice products.

 

[JCX03]

New Offerings ~

This run is PreOrder only with my move to SLC. Unsure how many extra units of each design will be made.

This post will be edited to show finalized photos soon.

More info can be found here on the products, but if you have any questions, please let me know .

Order Here

Quick Notes
- Pricing includes shipping CONUS
- All products are coated.
- Includes hardware which is usually Stainless Steel.

Overview Non Spoiler // $420
- All aluminum

Overview Spoiler // $420
- All aluminum

Mirror Ditch Light Bracket // $85 for a pair
- 3D Printed Fitment Plate
- Aluminum Flat Plate

Rear Accessory Bracket // $60 for a pair
- Made of Steel

3rd Row Molle Panel with Access Hole $160 (in Steel) Price is per side
3rd Row Molle Panel without Access Hole $160 (in Steel) // Not Shown Yet. Price is per side
3rd Row Molle Panel without Access hole $175 (in Aluminum) // Not Shown Yet. Price is per side

3rd Row Molle Panel with Access Panel $200 (in Aluminum) // Price is per side

 

[Icy Eew]

Shoot. I’m sorry I missed the order window. You going to sell again when you are in Salt lake?

 

[Kpack]

Excellent products. I wish some of these were around a couple years ago. I ended up having to redneck fab my own compressor mount, and I direct mounted my switch controller to the fuse box. Your solutions are so much better.

I'm definitely interested in the dash mount. That is something I've been needing for a very long time. Does it go through the plastic and mount to the radio brackets, or is it mounted directly to the plastic on the dash? Stable enough for a heavy load?

 

[JCX03]

Shoot. I’m sorry I missed the order window. You going to sell again when you are in Salt lake?

Sorry I didn't reply sooner but I'll have some extra pieces of everything except the molle panels and only a few ladders.

 

[Icy Eew]

Sorry I didn't reply sooner but I'll have some extra pieces of everything except the molle panels and only a few ladders.

Cool! I was interested in the dash panel and the rear accessory bracket. Let me know how to order since the google site is closed.

 

[JCX03]

Excellent products. I wish some of these were around a couple years ago. I ended up having to redneck fab my own compressor mount, and I direct mounted my switch controller to the fuse box. Your solutions are so much better.

I'm definitely interested in the dash mount. That is something I've been needing for a very long time. Does it go through the plastic and mount to the radio brackets, or is it mounted directly to the plastic on the dash? Stable enough for a heavy load?

Thank you! It's been a work in progress learning how to design all these things.

Regarding the dash mount - it's been super stable. I have my iPad pro 11" attached to mine. It's bolted through the dash and I use nylock and conical washers to lock it on place. It also contacts the dash subframe to prevent the nut from releasing.

I've had mine on since v1, and now I use the V2 and it's been . No complaints AFAIK from anyone who has either version and I've sold a good number of them. It also uses an industrial grade 3d printed nylon 12 spacer that is formed to the dash for good fitment and surface area mounting.

The weight really depends on how much leverage you plan to have on it as in away from the mount itself.

And last note, but the price went up $10 to $150 shipped to door. The price of MJF printing went up 30% since January this year .

 

[JCX03]

DM me on ig @kamdesignstudios - easier to reach me. If not, pm here is fine as well and I'll get your order taken care of.

Cool! I was interested in the dash panel and the rear accessory bracket. Let me know how to order since the google site is closed.

 

[Kpack]

Thank you! It's been a work in progress learning how to design all these things.

Regarding the dash mount - it's been super stable. I have my iPad pro 11" attached to mine. It's bolted through the dash and I use nylock and conical washers to lock it on place. It also contacts the dash subframe to prevent the nut from releasing.

I've had mine on since v1, and now I use the V2 and it's been . No complaints AFAIK from anyone who has either version and I've sold a good number of them. It also uses an industrial grade 3d printed nylon 12 spacer that is formed to the dash for good fitment and surface area mounting.

The weight really depends on how much leverage you plan to have on it as in away from the mount itself.

And last note, but the price went up $10 to $150 shipped to door. The price of MJF printing went up 30% since January this year .

Understood on the price, that's the story with everything. I'm ready to order if you have any available. I don't have Instagram, so I'll PM you here with my contact info and go from there.

 

[JCX03]

Understood on the price, that's the story with everything. I'm ready to order if you have any available. I don't have Instagram, so I'll PM you here with my contact info and go from there.

Yeah it really do be like that. I kept the same prices for as long as I could until it went up again .

Just PM me some info and I'll reply asap.

 

[Icy Eew]

PM sent as well. I also do not have instagram or Facebook.

 

[Kpack]

I ordered a dash mount from Kam Design Studios. I've been looking for something like this for a long time. The curved dash on the 1st gen Tundra/Sequoia makes it very difficult to find somewhere to mount phone, nav, etc. So glad this solution came along.

Shipping was fast and communication excellent. The instructions were clear and well-written. Install wasn't too bad. The worst part was trying to make sure the drilling jig was lined up correctly. Besides that the other difficult part was getting the washers and nuts on the front two bolts. Very difficult to access. I found that putting some grease/anti-seize on the washer and nut helped to keep them from falling all over the place and getting lost inside the dash. Total install time was a little over an hour.

It's very sturdy and works great with RAM Mounts. I need to get a 1.5" ball and tablet mount, then put a tablet up there for nav/Torque Pro. The included radio mount was a nice touch.

 

[JCX03]

I ordered a dash mount from Kam Design Studios. I've been looking for something like this for a long time. The curved dash on the 1st gen Tundra/Sequoia makes it very difficult to find somewhere to mount phone, nav, etc. So glad this solution came along.

Shipping was fast and communication excellent. The instructions were clear and well-written. Install wasn't too bad. The worst part was trying to make sure the drilling jig was lined up correctly. Besides that the other difficult part was getting the washers and nuts on the front two bolts. Very difficult to access. I found that putting some grease/anti-seize on the washer and nut helped to keep them from falling all over the place and getting lost inside the dash. Total install time was a little over an hour.

It's very sturdy and works great with RAM Mounts. I need to get a 1.5" ball and tablet mount, then put a tablet up there for nav/Torque Pro. The included radio mount was a nice touch.

View attachment 3019528

View attachment 3019529

Glad it's working out for you. Those two front nuts are very hard to access and the weird sitting while install isn't pleasant one bit. But once it's in, it's nice and firm.

The drill jig lines up with the edge of the dash hud, but I wish I had designed it to also line up with the lip where the radio hvac plate and dash mate.

Enjoy!

 

[theferg]

Hey there. Sent you a PM the other day. I'm interested in getting one of these electrical mounts for a 1G Tundra from you.

I'm anti-instagram. Is there another way to order?

Thanks!
-Ben

KAM DESIGN STUDIOS - Electrical Mount V1.5

1stGen Electrical Mount V1.5

www.kamdesignstudios.com

 

[Sverige]

New Offerings ~

This run is PreOrder only with my move to SLC. Unsure how many extra units of each design will be made.

This post will be edited to show finalized photos soon.

More info can be found here on the products, but if you have any questions, please let me know .

Order Here

Quick Notes
- Pricing includes shipping CONUS
- All products are coated.
- Includes hardware which is usually Stainless Steel.

Overview Non Spoiler // $420
- All aluminum

Overview Spoiler // $420
- All aluminum

Mirror Ditch Light Bracket // $85 for a pair
- 3D Printed Fitment Plate
- Aluminum Flat Plate

Rear Accessory Bracket // $60 for a pair
- Made of Steel

3rd Row Molle Panel with Access Hole $160 (in Steel) Price is per side
3rd Row Molle Panel without Access Hole $160 (in Steel) // Not Shown Yet. Price is per side
3rd Row Molle Panel without Access hole $175 (in Aluminum) // Not Shown Yet. Price is per side

3rd Row Molle Panel with Access Panel $200 (in Aluminum) // Price is per side

Want to make a rear hatch ladder like this for LC200? Pretty much only Gobi makes a rear hatch ladder for the 200-series. I bet there is a market there for a well-designed second option…