Jim C Aisin Carb?

[WALoeIII]

What does he charge for a nicely built one? THINKING about removing the Weber.

 

[dallen341]

I believe it is $300 using your existing core.

DOn

 

[schaats]

Not Aisin, but Aisan

 

[lowtideride]

Not Aisin, but Aisan

no he had it right...its AISIN

 

[yournamehere]

no he had it right...its AISIN

schaats meant ASIAN!

 

[jwest]

Hahahaha... no schaats is correct.

There's a lot of confusion in this area.
Aisin is the Aisin Seiki Corp. (ASCO/Aisin) owned by the All Aisin Group that manufactures automotive products.

Aisan is the manufacturer of carburetors.


ASIAN is a term to describe someone or something that has come from Asia.

.

 

[lowtideride]

took notice of that today....while under the hood.

 

[yournamehere]

took notice of that today....while under the hood.

It took you being under the hood to realize ASIAN means something from Asia? Yer weird.


jk

 

[FJ40Jim]

What does he charge for a nicely built one? THINKING about removing the Weber.

I've heard it's a little under $300; rebuilt, tweaked, tested and returned to you.

If a Cruiser has been fully "weberized" and the vendor sold the PO the full boat conversion, then some other parts are needed to make it right again.

Specifically:
- Fuel filter
- 5/16" (8mm) fuel hose
- Mechanical fuel pump, gasket(s) and spacer
- Metal fuel feed line, pump to carb
- Aisan 2 bbl Carburetor
- Carb base plate/heat shield
- 8mmx1.25 carb mounting studs & nuts
- Throttle linkage & pedal & mounting bolts
- Choke cable
- Air cleaner assembly & short mounting bolts
- Air cleaner/carb seal ring
- Molded VC/air cleaner breather hose
- Air cleaner snorkel & rubber hose
- Assorted vacuum hose

HTH.

 

[GLTHFJ60]

Jim told me $300 out the door minus shipping.

Why don't you just do it yourself? I did it and I was extremely successful. It ran like it was new!

Just an idea.

 

[lowtideride]

Hey Jim how can I get a hold of you for the smog pulley idler?

 

[toyman317]

Are there any addl. items needed for one that has been Holleyized?

 

[FJTOYMAN]

Hey Jim how can I get a hold of you for the smog pulley idler?

Dito, I sent P.M. but don't know if it went through.
Thanks
Andy

 

[beaufort-fj60]

I've got a Jim smog replacement pulley, very good deal

 

[FJ40Jim]

Are there any addl. items needed for one that has been Holleyized?

No, there's no difference due to the different carb.
Just varying levels of butchery to the throttle linkage and fuel supply system, depending on the skill of the parts sales droid and the installer.

 

[FJ40Jim]

Hey Jim how can I get a hold of you for the smog pulley idler?

You can PM or email me using the contact member link on this forum.

The idler assembly is $99, delivered. They are temporarily out of stock. Santa's elves were not working very hard in the shop last week.

I will build some more this week. Send me email/PM to get on the list to be notified when they are ready to ship.