Iron pig offroad open house october 9th

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I will have to arrange to swing by next time I'm up at George's.

I saw an Aqualu tub at IPOR...may be it has your name on it?
 
Tom and others -

Please post up your pics of the father and son follies at the rock garden!

Perhaps we should take up a collection and buy those two a AAA membership?:D

Donations gladly accepted. Cash is best but if you have to, please make checks payable to Bob Bascom ... Paypal and Mastercard also accepted, maybe even food stamps.

The good news is that I saw this coming and bought an empty Orion case and the seal and gasket set so I'm ready for a winter rebuild.

I had a good time, even with the "split case conversion". Sorry I missed you Stumbaugh.
 
I would like to thank everyone for stopping by to party with us. We would like to put on events like this on a regular basis in the future.
 
Sorry about the delay in posting these

1st set of pics are Vince, Cam & Ryan
ipor2010 01.webp
ipor2010 02.webp
ipor2010 03.webp
 
These 3 are Bob putting on quite a show

The first one he tried to roll it under it's own power before things went bad

2nd is after the carnage

3rd is Bob being the showman he is, tried to bring it out on 3 wheels and complete his roll while being winched

Let's hear it for Bob :clap::clap::clap::clap::clap::clap::clap::clap::clap:

Bob is also offering 8x10 autographed glossies for the low, low price of $19.95. This is to help offset the hookup charge from Cam :hillbilly:
ipor2010 04.webp
ipor2010 05.webp
ipor2010 06.webp
 
I'm sorry I missed it. Sounds like it was a good time.

Chris
 
Looks like I missed a fun time. Let's see a picture of the transfer case.


No pics yet but let's just say I'm going to have to wrap it in duct tape before I pull it. I believe the case is split all the way around.
 
Looks like I missed a fun time. Let's see a picture of the transfer case.

here's 2 pics right after it happened. I'm not sure how well the crack is going to show
bobstcase.webp
bobstcase1.webp
 
I was going for style points.
 
What do you guys think of this transfer case?

Well I got half of the transfer case off today.
xfr 004.webp
xfr 007.webp
 
No problemo Bobubba. That'll buff right out.

Did you contact AA re torque and shim settings for stock innards in the Orion case? Their site should have the most up to date pdf on that. You might want to check with Randy there.
 

Users who are viewing this thread

Back
Top Bottom