injectors for hj61

[BURGER]

What parts are all needed to replace my injectors. Are all I need is the injectors? I am going to replace the priming pump as well. Is there anything else I should replace while I have the fuel system open.

 

[Greg_B]

What parts are all needed to replace my injectors. Are all I need is the injectors? I am going to replace the priming pump as well. Is there anything else I should replace while I have the fuel system open.

I would suggest you take the injectors out, and send them to someone to be bench tested, and put under a scope to see how the needles are. If you need nozzles, it will be a wait, unless you use a shop that is dealing with these imports, and stocks them on the shelf, or has the pipe to get them. Either that, or a shop that is connected to another that carries the parts.

Chances are they may simply need inspection, cleaning, and re-shimming to spec. If you do not have an injector tester, there is no way you can ensure you have the correct crack open specs, even if you have the tips.

On the west coast of Canada I would recommend Fred Holmes Injection. http://www.fredholmesfuelinjection.com/ They know thier stuff, and are stocking tips and such to reduce downtime. If you feel beholden to another injection service shop (and there are other very good ones in the area), at least let them know Holmes has access to the parts.

EDIT...I know they stock 13BT and 1HD-T tips...not sure about 12HT

hth's

gb

 

[BURGER]

Calling on mon. thanks greg. I have put off the repair for long enough.