I think the RCLT going to almost as expensive 
IFS eliminate kit (1 Viewer)
- Thread starter Firemedic831
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
No interest at all . Maybe 2 years ago . Half the fun for me is the build. I still have so many big plans for this FJ. just takes Lots of Time and Money . Every year i make improvements
- Thread starter
- #23
Should be out any minute now .I think the RCLT going to almost as expensive
I mean, for IFS spindles, they are pretty cool. I just don't beat my daily driver hard enough to warrant that kind of upgrade. If I had a dedicated trail rig, it would be different for me without a doubt.
I also understand and respect the "thrill of the build" aspect. Looking forward to seeing how your project progresses.
I also understand and respect the "thrill of the build" aspect. Looking forward to seeing how your project progresses.
- Thread starter
- #25
If i am being honest the FJc is not the best platform to build . I could build a Mini truck for a fraction of the cost and not worry about it , The ifs has held up fine i take it on some good trails . Its just something i want to do and it will allow me to do the trails i do now with more confidence .
Not to derail, but was perusing the IG on Ultra4 builds and the like and stumbled upon this unique panhard solution.
- Thread starter
- #27
Parts are starting to flow in
1911
chupacabra
I live about 6-8 miles from them, and drive past their facility pretty regularly. Business must be good; they recently built a "campus" of huge metal buildings and etc.
- Thread starter
- #29
Picked up some body mount relocation mounts . I have a different type also I have been hesitant to install . These will work out much better
- Thread starter
- #30
These will work well
- Thread starter
- #31
Still
Waiting on parts I ordered and paid for 7 months ago
. I have about 10 I am sending them out today texts 
Yet somehow. I still have nothing . My axle should 
arrive in the next week or 2 .
Waiting on parts I ordered and paid for 7 months ago
. I have about 10 I am sending them out today texts Yet somehow. I still have nothing . My axle should arrive in the next week or 2 .
- Thread starter
- #32
Piece by piece. We are getting close . This is the speed sensor you need
Last edited:
- Thread starter
- #34
Yep i have seen your build on the FJc forums . For my set up i do not need all the OE brackets since i will be running a 3 link set up with coilovers in the rear
- Thread starter
- #36
Glued some stuff together today
- Thread starter
- #37
Made up the lower link frame mounts. And gussets today
- Thread starter
- #38
For those that need a visual of what they are . On the FJ you have to inboard the link mounts on the front .
Man that looks extremely beefy. Are you changing the lengths of your lower arms significantly?
- Thread starter
- #40
Are you asking about the rear links ? I have not started the rear yet But when i do it will be a 3 link set up and yes the links will be longer than OE . The Front is also a 3 link setup but going from IFS to solid axle so i can not compare to anything .
