I need fog light plugs

[Tahomatom]

Does anybody who has bought an aftermarket bumper have the fog light plugs they are looking to get rid of /sell.

My truck was in an accident and the wires ripped right out of the female side of the plug that the bulbs go into on both fog lights.

The tech at the local dealership said it was part of the wiring harness and i dont want to replace the complete harness.
Local Toyota Salvage yard said they didnt have any.

I just need the plug and maybe an inch or 2 of wire so I can splice it all together.

Someone out there must have them lying around if they installed non OME fog lights.

I just posted this pic on another thread but threads are always more fun with pictures so here you go.

 

[Anthony.L]

Week late, I cut mine off and tossed in the trash when finaly wiring my ARB fogs last week.

I do know your local dealer is not correct. You can order just connectors with short pig tails. Call a real dealer parts dept like Lowe's or CDan at American Toyota.

 

[2000UZJ]

You need 9006 male and female pins and sockets. We supply them (Common Connections) or you can go to your local autoports store and get the pigtails. Only downside is you will need to solder the pigtails on. IIRC correctly the OEM fogs use a 9005, however the sockets are identical, other than the 2 slides vs 1 for the 9005/6. Either one will work.

 

[TrekboxX]

I have them, and I'm in the bay, too. I will have to check how much wire is still left...