How do I change this bulb? (.0003 banana question)

[tea LC]

I've tried the obvious screw - what's the trick?

TIA

 

[elysium]

After you remove the one screw, the lamp housing pulls straight out (not to the side). By straight, I mean to the front of the rig.

 

[KurtKuhn]

After you remove the one screw, the lamp housing pulls straight out (not to the side). By straight, I mean to the front of the rig.

And when he says straight, he means straight, straight, straight. There's a female grommet on the bottom of the rig that accepts a nubby (technical term) from the light assembly. If you have to wiggle the assembly to get it out, wiggle gently up and down, NOT left to right.

As a side note, it's a good thing that you're changing it in the summer since I found that the grommet is pretty tight in the winter.

-KK

 

[Beowulf]

A picture is worth a thousand words. From Christo's web site.

"After removing the screw, the light needs to pulled towards the front of the vehicle. The bottom locking pin is what keeps it locked and in position."

-B-